Good Quality TU-1J02 thermal wax actuator for electric switch valve to Sao Paulo Manufacturers
Short Description:
Product Detail
Product Tags
Good Quality TU-1J02 thermal wax actuator for electric switch valve to Sao Paulo Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Good Quality TU-1J02 thermal wax actuator for electric switch valve to Sao Paulo Manufacturers, The product will supply to all over the world, such as: Montpellier , Portland , Canberra , Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!
Broken stop in a tilt actuator caused the back of the chair to flip over. I was able to get the actuator working again but without the stop the chances of running it right out the end were high, so high it happened just after I left. She can’t see it so she has no warning of when it is nearing the end. I made up a bar to replace the actuator and lock it in place but because the company had already been called they were already on their way. They “fixed” it by jamming a much larger actuator from a different chair in place. When I checked up on her later that night it became apparent this wasn’t going to work. First they had hooked the thing up so she had bumped the button jamming the seat upright. Second when the chair tilt was used the two actuators slid along each other ripping the hell out of everything. Third when they jammed this big piston in place they didn’t check for wire clearance and the insulation was already cut through in just a few hours. I took what they had done back apart, replaced it with the bar I made and told her that if anyone says *anything* about it that they were to give me a call and I would explain why I did everything. I figure she was at best two days from cutting those wires and shutting that whole chair down wherever it was. Now I don’t have to worry about he getting stranded.
Your mobility, don’t take it for granted.
This is a basic setup of a basic garden watering system. This test is to see how the relays drive the water solenoids, checking the performance of the solenoids and power designs for driving them.
Yep, I can see the leaks, and they’ll be fixed when installed properly 
The next versions will include carefully placed ground moisture sensors (hygrometers) for each of the 5 ‘channels’/garden beds, so that that bed is checked and only the dry ones are watered. This will be tied into a real time clock and an ambient temp sensor, so watering only occurs at dusk and/or dawn, (with allowances for daylight savings) to reduce water wastage via evaporation.
