High Definition For TU-3A01 thermal wax actuator for air conditioner and compressor for Japan Manufacturer
Short Description:
Product Detail
Product Tags
High Definition For TU-3A01 thermal wax actuator for air conditioner and compressor for Japan Manufacturer Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for High Definition For TU-3A01 thermal wax actuator for air conditioner and compressor for Japan Manufacturer, The product will supply to all over the world, such as: France , USA , Danish , If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.
Dynex checkball hydraulic pumps use two check valves in each piston pumping-chamber to direct flow from the inlet side of the pump to the pump outlet port. This pump design operates reliably with a wide range of fluids at high pressures. The positive-seating check valves provide better wear and higher volumetric efficiency, especially with low-viscosity, low-lubricity fluids.
Operating benefits include:
VERTICAL MOUNTING: Unlimited pump orientation provides circuit flexibility.
BI-DIRECTIONAL ROTATION: Constant flow direction regardless of drive shaft rotation.
PRESSURES TO 20,000 PSI: The design provides a high horsepower-to-weight ratio handling higher loads than other pumps.
WIDE RANGE OF FLUIDS: The check valves provide better wear and higher volumetric efficiency with low-lubricity/low-viscosity fluids.
NO LUBRICATING OIL REQUIRED: Only the pumped fluid is required for internal lubrication, eliminating a secondary lubrication circuit and reducing maintenance.
CONTAMINATION TOLERANT: A large flow path into pistons, and output through the outlet check valves, allows contamination to be flushed through the pump.
RESISTANT TO CAVITATION: The outlet checks do not unseat until pumped fluid reaches load pressure, providing reduced decompression shock and resistance to cavitation damage.
SPLIT-FLOW: Multiple outlet pumps simplify multiple-function circuits using only one pump, and provide greater output-flow accuracy than flow dividers for synchronized movement.
To learn more, visit https://www.dynexhydraulics.com
Lecture series on Control Engineering by Prof. Madan Gopal, Department of Electrical Engineering, IIT Delhi. For more details on NPTEL visit …
