High Quality Energy Storage Wax Series to Sierra Leone Manufacturer

“This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.

For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!

This is the panel you’ll use to set the heater and air conditioner system. Press THIS button to turn the system ON. The indicator light will illuminate and the system will automatically regulate and maintain fan speed, air flow and temperature in the cabin.

Turn THIS dial to set the desired temperature. Turn THIS dial if you wish to set a separate temperature for the passenger’s side. If you wish to return to controlling the temperature with the driver’s control, press the DUAL button.

You can override the settings of the automatic heater and air conditioner system as needed.

For example, you can turn THIS dial to adjust the fan speed up or down.
Press THIS button to change the air flow mode. Your choice is shown on the display. The airflow can be set to the:
● center and side vents,
● center and side vents, and foot outlets,
● mainly from foot outlets, and
● from the defroster and foot outlets.

Press THIS button to recirculate air inside your vehicle. The indicator light will illuminate. This increases A/C efficiency and helps block outside odors from entering the cabin. Press again to draw in fresh outside air. Please be aware that when a DEFROSTER air flow mode is selected, the air recirculation feature will not activate. Allowing outside air to enter the vehicle further improves defogging performance.
Press and hold the intake air control button to set the intake air control to automatic. The indicator light will blink twice.

Press THIS button to manually turn the air conditioner ON or OFF.

In hot or humid conditions, a visible mist may be seen coming from the vents. This does not indicate a malfunction.

You can return to automatic control of the heater and air conditioner system at any time by pressing THIS button.

To defrost or defog front and side windows, press THIS button. The indicator light will illuminate and air flow will be directed to the front and side windows.

The indicator light on the A/C button may also illuminate because the A/C compressor is activated to help dry the air and improve window clearing performance. The air can still be fully warmed with the A/C activated.

If the system is in DUAL mode, switching to DEFROST will automatically revert to driver temperature control so that both sides of the windshield defrost evenly.
Adjust the temperature to a setting that will best meet weather conditions. For windshield deicing, set the temperature to maximum heat. Also, using the manual fan control, set the fan speed to HIGH.

Press THIS button to defrost or defog the rear window and, if so equipped, the outside mirrors. The indicator light will illuminate. Press again to turn OFF. If not turned OFF manually, this function will automatically deactivate in a period of time.

Press THIS button to turn the heater and air conditioner system OFF.

There is a temperature sensor located on top of the dashboard near the windshield that helps regulate the automatic heater and air conditioner settings. Please keep this area clear of papers and other materials.

Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”

In this video I demonstrate the basics of how to lacquer, oil or varnish your wooden floors.

https://www.howtosandafloor.com/how-to-lacquer-or-oil-a-wood-floor/

Lacquering wood floors is relatively easy when you know how. There are benefits to years of practice, but with just a few nudges in the right direction you can achieve 80%+ of the quality of finish as a professional floor finisher.

If you are lacquering or varnishing your wood floors, then I would suggest using a high quality medium pile roller (no loss).

For oiling wood floors, I would suggest using a short pile roller (again high quality) because a coat of oil with a medium pile roller can take days to dry.

As demonstrated by the video you want to start applying the floor finish of your choice in the corner furthest from the door. Brush the lacquer on as if you were cutting in when decorating, then apply the lacquer, oil or varnish with the roller, keeping within the lines of the with you have chosen to lacquer.

Once you have completed one row, you go back to the other end of the room and start again. Keep applying strips of lacquer around 24 to 36 inches wide until you are right in front of the door. You then do the same again but you only apply a little at a time as you work your way out of the door.

Always check these instructions with what is written on the tin. There are many different techniques. Some oils are trowelled on and then buff to shine.

If you have any questions (or criticisms!) you can ask them below or on the associated article linked at the top of this description.