High Quality for Electric Wax Series Supply to El Salvador
Short Description:
Product Detail
Product Tags
High Quality for Electric Wax Series Supply to El Salvador Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
Our pursuit and firm aim should be to "Always fulfill our buyer requirements". We carry on to produce and structure top-quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for High Quality for Electric Wax Series Supply to El Salvador, The product will supply to all over the world, such as: Greenland, Austria, Algeria, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.
My 2009 Dodge Ram 1500 was making a knocking sound whenever starting it.
You can here what it sounded like here:
https://www.youtube.com/watch?v=8XU_BycWqSQ
In doing a search on the problem I found this video that was extremely helpful:
https://www.youtube.com/watch?v=_hN6otxId5s
His dash is a little different from mine since he has the Laramie Edition.
The part that went bad is the Blend Door Actuator. I got the replacement part from my local Dodge dealer. Some folks seem to think there is a recall on this but for $50 I figured it was easier just to do it myself and not spend a bunch of time with the dealership.
I shot this video since the actuator in my truck was accessed differently.
Hopefully this can help someone else save some time and money on this very easy repair.
Click Here to Subscribe! https://youtube.com/carsntoys Website: https://carsntoys.net
In this video we explore how to test and replace the EVAP pressure sensor P0450. If you’ve been following this channel you know we have a number of EVAP repair videos available. This video will add to that collection.
Trouble code p0450 deals with an improper voltage signal from the EVAP pressure sensor to the ECM. This could be due to a bad harness connector, the pressure sensor or the EVAP canister vent control valve. (link below for this component)
This sensor is used with a number of components in throughout the EVAP system. The EVAP control system pressure sensor is located in the purge line. The sensor detects pressure inside the purge line and modifies the voltage signal sent from the ECM. As the pressure increases the voltage rises. This sensor is used for on board diagnostics.
Tools Used:
Safety Glasses
Digital Multi-Meter
Vacuum Pump (Mityvac)
10mm socket & ratchet to remove sensor from chassis.
Additional EVAP repair videos:
EVAP Canister Vent Control Valve P0446 – https://youtu.be/C1h-3W4SFgk
EVAP Canister Purge Control Valve P0443 – https://youtu.be/4z9uUwc3iV8
EVAP Canister Purge SOLENOID Valve P0443 – https://youtu.be/7ni-mjr1xeg
EVAP Canister Purge Volume Control Valve P1445 – https://youtu.be/QnVUBYdFHGI
Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk.
Publication, reproduction or distribution of this film is strictly prohibited.
This was performed on a 1997 Nissan Maxima. Please check with your vehicle’s repair manual for testing parameters.
