High Quality for Thermostatic Wax Series to Berlin Importers
Short Description:
Product Detail
Product Tags
High Quality for Thermostatic Wax Series to Berlin Importers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for High Quality for Thermostatic Wax Series to Berlin Importers, The product will supply to all over the world, such as: Danish , Morocco , Vietnam , Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
www.polystarco.com
sales@polystarco.com
HNT 65V Plastic Recycling Machine
TANGENTIAL TYPE THREE-IN-ONE PLASTICS RECYCLING PLANT
Increased output feedscrew that efficiently fully melts the plastic
In-line concept of densification and extrusion reduces energy and labor costs by up to 40% compared to traditional multi-stage batch system
High quality of granules
Reduces wear of screw and barrel due to consistent feeding with preheated and densified material
Heavy duty gear box with precision ground pinions and oil cooling to extend operational life
Long L/D ratio screw for outstanding mixing, stable extrusion, and high productivity
It handles various bulky and lightweight plastic materials, such as “Film, fibers, skeletal offcuts, flakes, bottles and lightweight mouldings and can quite happily accept precrushed chips of plastic from heavier mouldings as an alternative feedstock
Applicable waste materials: HDPE, LDPE, LLDPE, PP, ABS, & PS etc
Hot die face pelletizer makes uniform size pellets by the use of 1-4 flexible blades
The pellets are separated from the water by vibrating, perforated, stainless steel chute. The over sized clumps or lumps will be screened off
Finished pellets are then pneumatically conveyed to a storage tank
Water provides high efficiency cooling of the pellets and this is re-circulated
Hydraulic latern-slide types screen changer, fitted with pressure gauge, for non-stop operation
Screen changes are signaled when present pressures are reached
Output : 80 — 120kgs/hr
Power consumption : 50KW
Power required : 60KW
Conveyer unit :
Feeding band : 2600 x 330mm
Driving motor : 1/4HP x 6P
Shredding drum
Driving motor : 30HP x 4P
Cooling blower : 1/4HP x 1 set, with water cooling device
Extruder unit :
Screw dia : 65mm L/D : 28/1
Barrel cooling : 1/4HP x 2 sets with 2 zones
Main motor : 40HP AC + inverter control
Gear box : FC25, with cooler x 1 set
Screen changer : Hydraulic- latern-slide type, with power pack, non-stop operation.
Includes “Dynisco” pressure gauge x 1 set
Die : x 2 sets, one for PE, one for PP
Die face cutting motor : 1HP x 4P with inverter control
Water jacket : SUS304 stainless steel with 1HP water pump
Vibrating motor : 1/4HP x 4P x 2 sets
Conveying blower : 2HP
Collecting tank : SUS304 stainless steel made at 300kgs volume
Control panel x 1 set includes the followings:
1. Ampere monitoring for automatic feed control
2. Barrel temperature regulation
3. Pressure monitoring with safety cut out
Khameleon Koatings bench testing of linear actuator arms with 4″ throw, 12vdc.
