High Quality TU-1C09 thermal wax actuator for thermostatic automatic water drain valve to Australia Importers
Short Description:
Product Detail
Product Tags
High Quality TU-1C09 thermal wax actuator for thermostatic automatic water drain valve to Australia Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for High Quality TU-1C09 thermal wax actuator for thermostatic automatic water drain valve to Australia Importers, The product will supply to all over the world, such as: Liverpool , Plymouth , Malaysia , We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
This one goes out to BowlingBallOut who posted a question about a sticky throttle on his Saturn. It was a great question so I decided to make this video in response to it. There are many different configurations of throttle assemblies but for the most part if you have a throttle that is sticking you might be able to fix it using the procedures in this video. I am aware you may not able to purchase spray throttle cleaner in some states now but I’m sure they have some alternative available at your local parts store.
One very important note here is that if you have a drive by wire throttle (DBW), then I do NOT recommend this procedure. If you perform this procedure on a DBW throttle body you may need to have the throttle reset in order to get your engine to idle or even start. I only recommend this procedure if you’re trying to correct a problem with a sticking throttle.
If you have idle problems, I recommend you check out this article on my website.
https://www.ericthecarguy.com/faq/solving-automotive-idle-problems
The best place for answers to your automotive questions: https://www.ericthecarguy.com
BowlingBalOutl’s channel
https://www.youtube.com/user/bowlingballout
Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts
Twitter: https://twitter.com/EricTheCarGuy
Google+: https://plus.google.com/100195180196698058780/posts
Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
This video introduces plastic Injection Molding in general, and our home-made machine in particular.
Bench-top injection molding machines are hard to come by by in the UK. Here are the two featured in the video:
This is Galomb’s machine £2495 https://www.injectionmolder.net/order_items.htm
This is the Travin TP1, at £2750 https://www.travin.co.uk/tp1.html
In the USA you can find the cheapest item we know of; the LNS unit at $1500 (£1000)
https://www.techkits.com/model_150/home.html
Our unit does the same job just as well, but we made it for a lot less. This is our third iteration – it’s not easy. We’ve used this one extensively and it works perfectly.
The unit specifications:
220 Volts, 400 Watts
Welded steel construction
Stainless steel (303) barrel
Digital temperature control unit for high accuracy, reliability & ease-of-use
Solid State Relay switching for silent operation & zero wear
About 1 cubic inch capacity
Works like a charm. Highly practical and great fun.
Opens up a whole new world of learning and possibilities for the hobbyist or engineer.
If you’d like to own a machine like this one, we can build on e for you for a fraction of at commercial machines cost in the UK.
Your questions are very welcome.
