New Arrival China TU-1F05 thermal wax actuator for air conditioner and compressor Supply to Ukraine
Short Description:
Product Detail
Product Tags
New Arrival China TU-1F05 thermal wax actuator for air conditioner and compressor Supply to Ukraine Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We are also specializing in improving the things management and QC method in order that we could retain terrific edge inside the fiercely-competitive small business for New Arrival China TU-1F05 thermal wax actuator for air conditioner and compressor Supply to Ukraine, The product will supply to all over the world, such as: Poland , Florence , Kuwait , After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
This single cylinder thermo acoustic engine operates from a tiny methylated spirits (denatured alcohol) flame. The optimum running speed is 2700rpm when warmed up fully. As far as we know this is the fastest thermo-acoustic engine available.
The thermo acoustic engine is known by several names, including resonant engine, lag engine, lamina flow engine and traveling wave engine. This engine, with its transparent main tube, beautifully and elegantly demonstrates the principles behind such engines.
How does it work?
The thermo-acoustic engine works by converting sound waves into motion. The sound waves are generated by heating one end of a ‘stack’ of coiled material and allowing the other end to remain cool.
The engine is fired by a small spirit burner. By heating the end of the coiled ‘stack’ a bouncing pressure wave is set up inside the tube. The crucial element in the thermo-acoustic engine is the ‘choke’, which reduces the bore of the tube.
It is the pressure fluctuations that ultimately drive the engine, in the expansion phase the piston is pushed outwards, in the contraction phase the piston is pulled inwards.
The engine requires a small push of the flywheel for it to start. Without the small push the pressure and velocity of the standing wave remain at equilibrium. Move the flywheel and the equilibrium is shifted, thus allowing the cyclic variations to take place.
Today we’re going to show you how to remove the front seat of an Audi A4 B6/B7.
Step 1: Move the seat to the most forward position possible
Step 2: Tilt it up and for ease, put the back forward too
Step 3: Slide up the seat belt panel
Step 4: Loosen the clip inside and push it down to detach bottom portion of the belt
Step 5: Go behind the seat and remove the two rear bolts from the guards
Step 6: Use a pry bar to remove the push pins underneath the guards
Step 7: Slide off the guards
Step 8: Undo the two bolts in the track and remove them
Step 9: Move the seat all the way back
Step 10: Remove the same push pin up front, as you did from the back
Step 11: Undo the bolts from the front track and remove them
Step 12: Get the seat to the center position of the track and tilt it backwards
Step 13: Pull panel on the floor off
Step 14: Pinch the clip to detach
*Make sure your battery is off
Step 15: Pull up wiring
Thanks for watching Wolf Auto Parts’ video! We are located at 135 Nelson Blvd. in Montrose, Minnesota. We are a salvage yard specializing in recycled Audi parts. We take pride in our parts, removing each one from the cars we take in and giving it a thorough inspection and cleaning. For more information about Wolf Auto Parts head over to https://www.wolfautoparts.com/ or call us at 1.612.424.9000.
Used Parts: https://www.wolfautoparts.com/
More How-To’s and DIY’s: https://www.wolfautoparts.com/audi-how-to-diy.html
Subscribe to our YouTube Channel: https://www.youtube.com/user/AudiPartsOnline
