OEM Factory for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Spain
Short Description:
Product Detail
Product Tags
OEM Factory for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Spain Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future alongside one another with your esteemed enterprise for OEM Factory for TU-1F04 thermal wax actuator for air conditioner and compressor Wholesale to Spain, The product will supply to all over the world, such as: Russia , Boston , Belize , we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
In this segment from Canada’s PowerBoat TV, host Mike Gridley walks through a trim tab retrofit of a 1986 Regal Commodore 360. Here he changes out a Boat Leveler system for a Bennett trim tab system, complete with Electronic Indicator Control and Auto Tab Control. Mike ends the segment with a test ride to see how planing has improved.
Screw or cone type log splitter.
Built using an ebay kit for the screw, shaft, bearings and 200mm pulley.
The Motor is a 2.2kw (3hp) single phase 2800rpm with an 80mm pulley giving approximately 1000rpm at the splitter. I used this motor as it is the biggest I could run safely on a 13amp plug.
In this video I’m splitting alder and birch.
It currently runs too quick to split large discs of harder woods but is nice and fast for splitting down smaller stuff and making kindling.
The last bit of the video shows the procedure for reversing it when it jams.
