One of Hottest for Thermostatic Wax Linearity Series for Mali Manufacturers
Short Description:
Product Detail
Product Tags
One of Hottest for Thermostatic Wax Linearity Series for Mali Manufacturers Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility sAcid and Alkali |
Mechanical Impurity |
||
|
B-5-1 |
Liquid |
-20/-5 |
≥7 |
Non. |
Non. |
|
B0-1 |
Liquid |
-15/0 |
≥7 |
Non. |
Non. |
|
B5-1 |
Liquid |
-10/5 |
≥7 |
Non. |
Non. |
|
B15-1 |
Liquid |
0/15 |
≥7 |
Non. |
Non. |
|
B20-1 |
Semisolid |
5/20 |
≥7 |
Non. |
Non. |
|
B25-1 |
Semisolid |
10/25 |
≥7 |
Non. |
Non. |
|
B30-1 |
Semisolid |
15/30 |
≥7 |
Non. |
Non. |
|
B35-1 |
Semisolid |
20/35 |
≥7 |
Non. |
Non. |
|
B40-1 |
Powder, Slice , Column |
25/40 |
≥7 |
Non. |
Non. |
|
B45-1 |
Powder, Slice , Column |
30/45 |
≥7 |
Non. |
Non. |
|
B50-1 |
Powder, Slice , Column |
35/50 |
≥7 |
Non. |
Non. |
|
B55-1 |
Powder, Slice , Column |
40/55 |
≥7 |
Non. |
Non. |
|
B60-1 |
Powder, Slice , Column |
45/60 |
≥7 |
Non. |
Non. |
|
B65-1 |
Powder, Slice , Column |
50/65 |
≥7 |
Non. |
Non. |
|
B70-1 |
Powder, Slice , Column |
55/70 |
≥7 |
Non. |
Non. |
|
B75-1 |
Powder, Slice , Column |
60/75 |
≥7 |
Non. |
Non. |
|
B80-1 |
Powder, Slice , Column |
65/80 |
≥7 |
Non. |
Non. |
|
B85-1 |
Powder, Slice , Column |
70/85 |
≥7 |
Non. |
Non. |
|
B90-1 |
Powder, Slice , Column |
75/90 |
≥7 |
Non. |
Non. |
|
B95-1 |
Powder, Slice , Column |
80/95 |
≥7 |
Non. |
Non. |
Product detail pictures:
Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for One of Hottest for Thermostatic Wax Linearity Series for Mali Manufacturers, The product will supply to all over the world, such as: Riyadh , Ecuador , Austria , Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
NASA’s twin Radiation Belt Storm Probe spacecraft underwent lengthy and rigorous testing at APL prior to shipping to the Kennedy Space Center on May 1, 2012.
Shown here are:
-Solar array deployment testing
-The propulsion water load test, in which water, instead of propellant, is loaded into the spacecraft for testing purposes
-The stacked vibration test to simulate the physical rigors of launch on the two stacked spacecraft
-The separation system shock test, which tests the separation of the two RBSP spacecraft from each other after reaching orbit
- Launch Vehicle/spacecraft B separation system shock test, which tests the separation of the B spacecraft from the launch vehicle after reaching orbit
- Whip boom deployment test (deploying one of the EFW instrument booms)
- Thermal vacuum system test, which simulates the airless environment and extreme temperature fluctuations in which RBSP will operate on orbit
More information on RBSP is available at https://rbsp.jhuapl.edu/ and https://www.nasa.gov/rbsp.
Fuel Filter Replacement in a nutshell:
1) Replace every 20K miles (I do mine every 10K with oil change).
2) Have the right filter for your housing.
3) Engine OFF! Remove Upper Sound Absorber Panel.
4) Water Separator Service (1 Screw Plug, 1 Washer Seal)
a. Remove Screw Plug and old Washer Seal with Torx T30 bit.
b. Siphon water at bottom of Filter Housing from top of housing – A.K.A Fuel Sump.
c. Siphon enough fuel to avoid spillage when Housing is opened.
d. Reinstall Screw Plug with New Washer Seal. Torque 3 Nm (27 in-lb).
5) Fuel Filter Replacement (1 Filter, 2 Seals on Filter, 2 Seals in Housing)
a. Remove 5 Torx T30 Bolts and lift off Upper Filter Housing with lines undisturbed.
b. If you see any amount of metal particles TAKE THE CAR TO A PROFESSIONAL! You have a major issue.
c. Pull out old Filter and Seals in Housing.
d. Clean as necessary Lower Filter Housing by Siphoning out remaining Water/Fuel.
NOTE: Removal of Lower Filter Housing is not a requirement. So long as you remove any contaminants found at the bottom of the canister by other means.
e. Install New Filter and New Seals.
f. FILL CANISTER WITH CLEAN FUEL to help purge air. (approx. 650 ml or 22 oz) —OR— Use VAG-COM to operate fuel pump from fuel tank to prime the fuel system (the air will be sent back to the tank to vent) SEE VAG-COM STEP BELOW (7).
g. Reinstall Upper Filter Housing and secure with 5 Bolts. Torque 5 Nm (44 in-lb).
6) Reinstall Upper Sound Absorber Panel.
7) If you have VCDS/VAG-COM, operate fuel pumps to purge air from Filter Housing.
8) Otherwise, Start Engine & try to run it at 2K RPM for at least 30 seconds. If Engine shuts down, restart engine (this method is not preferred. it is bad for your High Pressure Fuel Pump).
NOTE: Turning key to turn on Accessories does not turn on the fuel pumps, from what I have read, only when the key is turned to Ignition (Engine Start).
————————————–
A visual aid to what to expect when replacing the Fuel Filter on the 2009 VW Jetta TDI (A5 – CBEA ).
I used as a reference the Bentley Publishers VW Jetta Service Manual (2005-2010) as well as a couple of very good write-ups which can be found at the following links. Many thanks to those who took the time to document and share the information at these links.
https://www.myturbodiesel.com/1000q/a5/2009-2010-VW-TDI-fuel-filter.htm
https://www.tdiblog.com/tdi-do-it-yourself/replacing-fuel-filter-a5-brm-cbea/#more-148
I obtained the Mann Fuel Filter from IDPARTS.COM (formerly TDIPARTS.COM), UPS Ground Shipping was free with them. Amazon.com also offers the same Mann Fuel Filter for those who are exclusive to Amazon.
