Online Manufacturer for Low Temperature Wax Export to Colombia
Short Description:
Product Detail
Product Tags
Online Manufacturer for Low Temperature Wax Export to Colombia Detail:
Automatic Temperature Regulating Agent Series is a kind of thermal expansion materials, which depends on principles that the substance expands when it is heated and constricts when it is cooled and a liquid is incompressible. It can automatically regulate temperature. When the ambient temperature goes up to the special value, Automatic Temperature Regulating Agent goes up to the special temperature with the ambient temperature, its unit volume increases. When the ambient temperature falls down to special value, Automatic Temperature Regulating Agent also falls down to the special temperature with the ambient temperature, its unit volume reduces. The agent is loaded in the purpose-made thermostatic element. The variation of ambient temperature takes a pressure and the thermostatic element takes a change, and this change brings the movement of either the appurtenance of the thermodynamic component or itself, thereby carrying out the automatic opening & closing function. All sorts of temperature controllers and the electrical switches are developed depending on the physical feature of Automatic Temperature Regulating Agent. It has been widely used in the fields of refrigeration, auto-control system, automobile industry, petrochemical industry, sanitary ware, heating and ventilating, electric electron, building, space & aviation etc.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
||||||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
|||||
|
A30-1 |
Powder, Cream |
30/40 |
7 |
Non. |
Non. |
|||
|
A30-2 |
Powder, Cream |
30/40 |
10 |
Non. |
Non. |
|||
|
A30-3 |
Powder, Cream |
3045 |
10 |
Non. |
Non. |
|||
|
A30-4 |
Powder, Cream |
30/60 |
8 |
Non. |
Non. |
|||
|
A30-5 |
Powder, Cream |
30/65 |
4 |
Non. |
Non. |
|||
|
A30-6 |
Powder, Cream |
30/85 |
10 |
Non. |
Non. |
|||
|
A32 |
Powder, Cream |
32/60 |
4 |
Non. |
Non. |
|||
|
A33 |
Powder, Cream |
33/45 |
6 |
Non. |
Non. |
|||
|
A35 |
Powder, Cream |
35/45 |
5 |
Non. |
Non. |
|||
|
A35-1 |
Powder, Cream |
35/45 |
10 |
Non. |
Non. |
|||
|
A35-2 |
Powder, Cream |
35/50 |
8 |
Non. |
Non. |
|||
|
A36 |
Powder, Slice , Column |
36/62 |
5.5 |
Non. |
Non. |
|||
|
A37 |
Powder, Slice , Column |
37/47 |
9 |
Non. |
Non. |
|||
|
A38 |
Powder, Slice , Column |
38/50 |
7 |
Non. |
Non. |
|||
|
A40 |
Powder, Slice , Column |
40/50 |
7 |
Non. |
Non. |
|||
|
A40-1 |
Powder, Slice , Column |
40/50 |
10 |
Non. |
Non. |
|||
|
A40-2 |
Powder, Slice , Column |
40/64 |
4 |
Non. |
Non. |
|||
|
A40-3 |
Powder, Slice , Column |
40/80 |
8 |
Non. |
Non. |
|||
|
A42 |
Powder, Slice , Column |
42/68 |
5 |
Non. |
Non. |
|||
|
A43 |
Powder, Slice , Column |
43/48 |
6 |
Non. |
Non. |
|||
|
A43-1 |
Powder, Slice , Column |
43/55 |
7 |
Non. |
Non. |
|||
Product detail pictures:
Innovation, excellent and reliability are the core values of our business. These principles today extra than ever form the basis of our success as an internationally active mid-size company for Online Manufacturer for Low Temperature Wax Export to Colombia, The product will supply to all over the world, such as: Sudan , panama , San Diego , Due to our good products and services, we have received good reputation and credibility from local and international customers. If you need more information and are interested in any of our products, please feel free to contact us. We look forward to becoming your supplier in the near future.
Flow Controlled Micropump mp6
The flow control in micropump mp6 can be realized by two different approaches:
The mp6 micropump with the double actuator provides an intrinsic sensor function. The reversible piezo effect can be used for actuation (pumping) and sensing mode. By continuous operation between pumping and feedback mode, no significant drop of pump performance is observed. Lower accuracy, in the order of 10%, can be achieved based on the intrinsic sensor function for the feedback signal. Especially at higher flow ranges under varying system conditions (e.g. pressure conditions at the in- and outlet) the piezo sensor principle provides constant performance.
For applications in the lower flow range with higher accuracy demands the closed-loop can be achieved by micropumps equipped with thermal flow sensors as sensing element. Accuracies in the range of 2-5% can be achieved by such hybrid systems.
In both cases smart system electronics will give the user access to the system status and also allowing the manual administration of additional bolus rates. Both approaches offer interesting new potential for various applications, especially where small, portable and battery powered systems are required. Depending on the detailed requirements a custom fit system can be evaluated and realized.
——————————————————————————————————–
Bartels specializes in innovative applications of micro systems technology (MST) in the business areas of classical consumer goods, mechanical engineering and medical technology. Microfluidics, microactuation and micromechanics constitute the company’s technological focus.
The international activities of Bartels Mikrotechnik subdivide into two business segments: Bartels microEngineering and Bartels microComponents.
Get an overview of the company on the following website, learn about Bartels’ products: the micropumps and microvalves, and find out more about our development services.
——————————————————————————————————
Website: https://www.bartels-mikrotechnik.de
Facebook: Bartels Mikrotechnik GmbH
Twitter: BartelsMikro
Contact: info@bartels-mikrotechnik.de
Thermac are leaders in the design, manufacture and servicing of a wide range of decontamination/hygiene units.
Our units are built and maintained by engineers who are qualified to install and inspect LPG and electrical systems and each unit fully conforms to HSG 247, VOSA and other required legislation.
A key focus of our design philosophy is to incorporate features to make their use as maintenance and trouble-free as possible and therefore cost effective.
The body is constructed of GRP-faced ply-board, polished to both sides to give a robust, easy-to-clean finish. All of the floor areas are covered with hard wearing fibreglass gel coat to maximise durability.
The unit combines a self-contained decontamination facility and a canteen area, as well as toilet facilities for operatives, into a single road-towable unit. This construction saves valuable space, time and towing logistics.
It is ideal for locations where space is limited.
Key features:
• The unit consists of three key sections: the Decontamination/Hygiene Area, Welfare Facilities and Toilet Facilities.
• For ease of use the LPG generator, gas bottles, waste pump, waste water filter and cassette toilet can be externally accessed via purpose-built hatches.
• Drain taps are also fitted at various points around the unit and are clearly marked for easy location.
• The unit comes with all necessary warning signs and the graphics can also be fully customised to a customer’s requirements.
