Online Manufacturer for TU-033 thermostatic cartridge wax sensor for sanitary ware to Macedonia Manufacturers
Short Description:
Product Detail
Product Tags
Online Manufacturer for TU-033 thermostatic cartridge wax sensor for sanitary ware to Macedonia Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Online Manufacturer for TU-033 thermostatic cartridge wax sensor for sanitary ware to Macedonia Manufacturers, The product will supply to all over the world, such as: Ecuador , Barcelona , Albania , We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
Our UPC/cUPC certified thermostatic shower is a masterpiece for your luxurious bathing enjoyment.
It provides you:
Safety–
*When cold or hot water supply temperature or pressure changes, thermostatic valve automatically adjusting the mixture of cold and hot water to maintain selected temperature within ±1°C.
*Automatic shutoff when cold water supply fails.
*Safety button on the override prevents accidental selection of higher temperature. It may be pressed to allow temperature increase.
*Patented thermostatic cartridge with Vernet wax element.
*Nano ceramic coating on the thermo cartridge minimizes the scale accumulation to provide stable performance.
Convenience–
*Enjoy your bathing comfort by one-time-setting the favorable temperature.
Prevention–
*Check valve inside the valve body to avoid cross flow.
Once the UDS reaches the pre-set temperature the blower turns off. The blower turns back on when temperature drops by a few degrees, then turns off once the temp goes up again just like a thermostat although much more sensitive. This cylic on/off switching of the blower serves to regulate the temperature inside the drum to within +/-3 deg-F for hours on end, as long as there’s enough charcoal in the fire basket. A temperature probe goes through the side of the drum and serves to sample the actual temperature inside drum.
An alarm sounds off once the temperature drops by about 20 deg-F from the set point and this prompts me to add more charcoal. The set point for the alarm automatically follows the temp setting on the knob; there’s no knob for the alarm set point. Now I can sleep without worrying about my cooking. 
The analog meter serves as a rough (un-calibrated) indication of the UDS temperature. I put it there cuz I had one lying around. Not really happy with it cuz I get more resolution from my digital thermometer.
Analog electronics reside inside the small black box. The temperature can be set anywhere from 180 deg-F to 300 deg-F by turning a knob. LED indicators for power and blower on. Alarm enable/disable switch. The black box is magnetically-mounted to the side of the drum for quick & easy mounting & de-mounting (no screws). Power is supplied by either a wallwart or a 12v battery and the unit is reverse-polarity protected, less than 2 watts power consumption.
after I installed this controller I never have thick dark smoke coming out of my UDS anymore and the temperature is REALLY constant now. No more guesswork and tweaking of the air vent holes which take a long time to figure out and varies with ambient temperature.
If you would like to order please see my ad here: https://www.sulit.com.ph/index.php/view+classifieds/id/16394529/Temperature+Controller+for+Charcoal+Fired+Ovens+and+Smokers?event=Search+Ranking,Position,1-1,1
