Ordinary Discount TU-3A01 thermal wax actuator for air conditioner and compressor for Ghana Factory
Short Description:
Product Detail
Product Tags
Ordinary Discount TU-3A01 thermal wax actuator for air conditioner and compressor for Ghana Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of Ordinary Discount TU-3A01 thermal wax actuator for air conditioner and compressor for Ghana Factory, The product will supply to all over the world, such as: France , Finland , Mexico , Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
In this video one of our Gas Plumbers shows you how to bleed a radiator.
If the top part of an individual radiator is cold, air could be trapped in the system. Bleeding the radiator releases that air and allows hot water to fill the whole system.
Before bleeding a radiator:
► If the whole radiator is cold, check that the radiator control and lock shields are open. If more than one radiator is cold, the whole system needs to be checked by one of our plumbers, you can contact us on 01246 217670
► Turn off the heating system before bleeding
► You need a special radiator key available from DIY stores. You will also need an old rag or cloth and possibly a bowl to soak up water that may come out of your radiator as you bleed it.
How to start:
► The bleed valve is a small square nut at the top end of the radiator
► Place the key over the valve and hold a cloth around it to soak up any water that comes out
► Gently turn the key anti-clockwise until you hear a hiss – this is the air being released
► When water starts to come through, turn the key back clockwise to shut the valve off
► DO NOT unscrew the valve completely.
If you are still experiencing any issues or should you wish for further help please get in touch with us.
Contact our Call Centre:
01246 217670
Email:
contactus@rykneldhomes.org.uk
Write to us at:
Rykneld Homes Ltd
Pioneer House,
Mill Lane,
Wingerworth,
Chesterfield,
S42 6NG
Twitter:
@Rykneld_Homes
How to Wire PCON CA – Wiring Controller for IAI Electric Actuator – ROBO Cylinder
https://www.intelligentactuator.com/controllers-teach-catalogs/
Accessary Connector (Plug)
0V is connected to “0V”…
Use AWG16 Wire…
24V is connected to “24V”…
Again, Use AWG16 Wire…
MPI and M10 Should come Jumpered…
24V from Controllers goes to the Motor…
Use AWG20 Wire for S1, S2, EMG-, BKRLS…
24V goes to S1, which is connected to S2 internally…
S2 is connected to EMG-…
– see details on the video —
Field Network Controllers
ROBO Cylinder Position Controller PowerCON 150: PCON-CA
ROBO Cylinder Position Controller High-thrust Motor Type: PCON-CFA
1: Supporting seven major eld networks
DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK (I, II), EtherCAT and EtherNet/IP are supported. Key
features include wire-saving, direct numerical specication, position number specication, and current position read.
2: PCON-CFA for high-thrust motors
Supported Actuators:
PCON-CA: ROBO Cylinder RCP4 / RCP3 / RCP2 series
PCON-CFA: ROBO Cylinder RCP2-RA8C / RA8R / RA10C / HS8C / HS8R series, ROBO Cylinder splash-proof RCP2W-SA16C / RA10C series
Field Network Type:
DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK, EtherCAT, EtherNet/IP
