Personlized Products TU-021 thermostatic cartridge wax sensor for sanitary ware for Hungary Factories

Personlized Products 
 TU-021 thermostatic cartridge wax sensor for sanitary ware  for Hungary Factories

Short Description:

Product Detail

Product Tags

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Paraffin Wax Manufacturers , Thermal Actuator Fabrication , Radiator Fittings , We welcome shoppers, enterprise associations and buddies from all areas of your environment to speak to us and request cooperation for mutual gains.
Personlized Products TU-021 thermostatic cartridge wax sensor for sanitary ware for Hungary Factories Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

Personlized Products 
 TU-021 thermostatic cartridge wax sensor for sanitary ware  for Hungary Factories detail pictures


Using a complete scientific high quality management program, superior high quality and superior faith, we acquire great reputation and occupied this industry for Personlized Products TU-021 thermostatic cartridge wax sensor for sanitary ware for Hungary Factories, The product will supply to all over the world, such as: Croatia , Jordan , Juventus , we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.



  • I’ve had several requests for an electric door lock or remote operated door lock so I decided to make a simple one using a cheap sliding bolt and an RC set-up using one servo.
    You could just use the servo with a battery and a switch or button if you modify the servo by removing the circuit board inside. There are plenty of videos on YouTube showing how to do this.

    Main components
    -
    Sliding bolt
    RC transmitter and receiver
    Servo

    Main Tools
    -
    Probably a drill and screwdriver to mount the bolt on the door
    I only used double sided tape for this demonstration.

    In response to several requests I am giving the eBay listings used for my R/C equipment, but please understand I am not recommending these items to you for any special purpose. These are just the ones that I used. I would recommend you did your own search on eBay or Amazon or anywhere you like and make your own choice. In fact I would recommend you bought a simple 1 or 2 channel remote control relay unit designed for this sort of job which is much cheaper although you would need to modify the servo to make it work with DC voltage. Using a proper r/c transmitter is a waste of money for a door lock unless you intend to use it for planes or cars afterwards.
    The radio control transmitter and receiver listing https://www.ebay.co.uk/itm/190888163364
    Last time I bought servos I got 10 on this listing https://www.ebay.co.uk/itm/261521757538
    and recently I bought a 12V Single Channel Fixed Encoding Wireless Remote Control Switch on this listing https://www.ebay.co.uk/itm/400628157682
    The battery pack is 4 AAA batteries in a holder that came from a small torch that I modified by adding a suitable plug to match the receiver.
    If you don’t want to use an r/c servo then you could buy a ‘door lock solenoid’ actually designed for the job, here is an example https://www.ebay.co.uk/itm/190856003511

    On the subject of modifying servos here is a very comprehensive video by Forrest Trenaman which is worth watching even though it leaves the servo controlled by a radio receiver so it is unsuitable for this case https://youtu.be/6G1nHfvl4aI
    You could follow the general flow of this video but the simple change is that you remove the circuit board entirely and connect your DC power supply directly to the motor via your switch so the servo drives your door bolt in and out continuously and you have to judge when it is locked or unlocked.

    Filmed using FujiFilm FinePix S4800
    Edited using Serif MoviePlus Starter Edition

    Related playlists
    Remote Control Door Lock playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB1HM3Smxg8X-IG7dSuJyzkK
    Electronic Projects playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB00lxaX8BD46F1QDJTe7Em4
    Radio Control playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB13Xcquw4Ff09MQzTPjeVkI

    My Channel page https://www.youtube.com/user/GrandadIsAnOldMan
    Oldest videos https://www.youtube.com/user/GrandadIsAnOldMan/videos?flow=grid&view=0&sort=da
    Most Popular https://www.youtube.com/user/GrandadIsAnOldMan/videos?sort=p&flow=grid&view=0
    Newest videos https://www.youtube.com/user/GrandadIsAnOldMan/videos?sort=dd&view=0&flow=grid
    Playlists https://www.youtube.com/user/GrandadIsAnOldMan/playlists?flow=grid&view=1
    I have thousands of videos on YouTube, to find one try my search guides https://youtu.be/ceBSOoOHcgw or https://youtu.be/Zj4UgwkwYRk
    My “GrandadsOtherChannel” channel is generally where I will host the videos that give extra detail or longer versions of the videos I post on my main channel https://www.youtube.com/channel/UC2mp_L8RoxMyw3ewwSecZ6Q

    Facebook https://www.facebook.com/grandadisanoldman/
    Merchandise – Check both of these links if you are interested as the prices will vary and the shipping charges will be different.

    https://www.redbubble.com/people/grandadiaom/portfolio

    https://grandadisanoldman.cottoncart.com/



    www.polystarco.com

    sales@polystarco.com

    HNT 65V Plastic Recycling Machine
    TANGENTIAL TYPE THREE-IN-ONE PLASTICS RECYCLING PLANT
    Increased output feedscrew that efficiently fully melts the plastic
    In-line concept of densification and extrusion reduces energy and labor costs by up to 40% compared to traditional multi-stage batch system
    High quality of granules
    Reduces wear of screw and barrel due to consistent feeding with preheated and densified material
    Heavy duty gear box with precision ground pinions and oil cooling to extend operational life
    Long L/D ratio screw for outstanding mixing, stable extrusion, and high productivity
    It handles various bulky and lightweight plastic materials, such as “Film, fibers, skeletal offcuts, flakes, bottles and lightweight mouldings and can quite happily accept precrushed chips of plastic from heavier mouldings as an alternative feedstock
    Applicable waste materials: HDPE, LDPE, LLDPE, PP, ABS, & PS etc
    Hot die face pelletizer makes uniform size pellets by the use of 1-4 flexible blades
    The pellets are separated from the water by vibrating, perforated, stainless steel chute. The over sized clumps or lumps will be screened off
    Finished pellets are then pneumatically conveyed to a storage tank
    Water provides high efficiency cooling of the pellets and this is re-circulated
    Hydraulic latern-slide types screen changer, fitted with pressure gauge, for non-stop operation
    Screen changes are signaled when present pressures are reached
    Output : 80 — 120kgs/hr
    Power consumption : 50KW
    Power required : 60KW

    Conveyer unit :
    Feeding band : 2600 x 330mm
    Driving motor : 1/4HP x 6P
    Shredding drum
    Driving motor : 30HP x 4P
    Cooling blower : 1/4HP x 1 set, with water cooling device

    Extruder unit :
    Screw dia : 65mm L/D : 28/1
    Barrel cooling : 1/4HP x 2 sets with 2 zones
    Main motor : 40HP AC + inverter control
    Gear box : FC25, with cooler x 1 set
    Screen changer : Hydraulic- latern-slide type, with power pack, non-stop operation.
    Includes “Dynisco” pressure gauge x 1 set

    Die : x 2 sets, one for PE, one for PP
    Die face cutting motor : 1HP x 4P with inverter control
    Water jacket : SUS304 stainless steel with 1HP water pump
    Vibrating motor : 1/4HP x 4P x 2 sets
    Conveying blower : 2HP
    Collecting tank : SUS304 stainless steel made at 300kgs volume

    Control panel x 1 set includes the followings:
    1. Ampere monitoring for automatic feed control
    2. Barrel temperature regulation
    3. Pressure monitoring with safety cut out

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !
    Close