PriceList for TU-1D01-100 thermal wax actuator for automobile thermostat for France Importers
Short Description:
Product Detail
Product Tags
PriceList for TU-1D01-100 thermal wax actuator for automobile thermostat for France Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for PriceList for TU-1D01-100 thermal wax actuator for automobile thermostat for France Importers, The product will supply to all over the world, such as: Turkey , Macedonia , Botswana , Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.
See: https://www.cyclepedia.com/yamaha-xt250-troubleshooting/
We were nearly complete reassembling our 2009 Yamaha XT250. The bike as delivered to us never quite ran right and the seller was anxious to get rid of it — he said he had cleaned the carb and gone through everything. When we got the bike it would run okay for a few minutes. Once warmed up, the engine start to stumble and bog under anything more than 1/4 throttle. It was cutting out so bad it sounded like it had a rev limiter at 3,000 rpm. However, all of the electrical tests checked out fine. The machine had very low miles and looked brand new. There were no indications of a mechanical problem. CYCLEPEDIA’s experienced technician was confident it was a rich running condition that was causing the problem…. Read more at: See: https://www.cyclepedia.com/yamaha-xt250-troubleshooting/
Full-automatic Plastic Cup Thermoforming Machine is completely automatically with material feeding, heating, stretching, in-mold cutting, rewinding into one process.
It is used for forming plastic sheet of PP, PS, HIPS, PVC, PET to produce various of disposable plastic products.
The disposable plastic products with round, square, rectangular or other shapes: plastic cups (jelly cups, coffee cups, yogurt cup, ice cream cups, cold cups, hot cups, drinking cups, beer cups), containers, dishes, bowls, trays, boxes, covers, lids, plates etc. (Please see below products samples)
Design Feature:
1. Servo plug assist reduces minimizing energy use on press and saving time of adjustment.
2. Touch screen and programmable PLC control.
3. Servo feeding assist reduces minimizing plastic scrap, ensures feeding sheet with same accuracy.
4. Hydraulic pressure system of low noise and faster running.
5. Retractable, independently operated oven.
6. Temperature control module ensures precise temperature accuracy and easy operation.
7. Accessing to all digitalized functions by pressing touch screen.
8. Automatic central lubrication.
9. Little maintenance effort required and long intervals between maintenance.
10. Most of components are from multi-national suppliers assures a reliability and worldwide compatibility.
11. Machine frame made by square steel with strong quality, reliable running.
12. Production capacity: For example: top dia of cup : 70mm, mold with 21cavities, the capacity is about 37800pcs/hr — 44100pcs/hr.
Technical Parameter:
Suitable Sheet: PP/PS/HIPS/PVC/PET
Forming Area: 650mm x 320 mm
Forming Depth(Max) 130mm
Sheet thickness: 0.2mm-2.0mm
Sheet width(max): 650mm
Max. Sheet Roll of Diameter: 700mm
Forming Speed(max): ≤35 times/min
Adjustable Travel: 100mm-350mm
Oil Pump Motor: 11kw, 6grades
Plug Motor Power: 4.4kw
Feeding Motor Power: 3.0kw
Rewinding Motor Power: 0.37kw
Heating Power: 60kw
Rated Power: 80kw
Actual Power: 55kw
Compressed Air: About 0.6-0.8pa/1.6M3
Heating Type: Top + bottom (IR Ceramic Heaters)
Temperature Control Module PID, K-type
Type of Mould Multi cavity:1-4rows
Cutting Type: In-mold cutting automatically
Water Supply: About 0.5M3/H
Overall Dimension(mm): About L3250×W1450×H2670
Weight: About 4.0T
………
