Professional Design TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to London Factory
Short Description:
Product Detail
Product Tags
Professional Design TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to London Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Professional Design TU-1D05 thermal wax actuator for industrial thermostatic water regulations mixing valve to London Factory, The product will supply to all over the world, such as: Brasilia , Malaysia , Hanover , We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
I used a fan to control the temperature of a room. When the LM34 temperature sensor gets above a set temperature recorded on the Arduino Duemilanove, it will do two things. One, it will activate the solid state relay and this will turn on the fan from the external power source. Secondly, it will log the time and store it on an internal stack on the micro-conroller. When the fan is turned on this will be signaled by a LED turning on. You will be able to cycle through the last three times the fan was activated by pressing a button connected to the micro-controller and this will be shown on the LCD screen.
