Professional High Quality TU-1C91 thermal wax actuator for industrial adjustable temperature switch control Supply to Muscat
Short Description:
Product Detail
Product Tags
Professional High Quality TU-1C91 thermal wax actuator for industrial adjustable temperature switch control Supply to Muscat Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Professional High Quality TU-1C91 thermal wax actuator for industrial adjustable temperature switch control Supply to Muscat, The product will supply to all over the world, such as: South Korea , Liberia , Oslo , In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
Gland Packing Globe Valves ( Straight- Through Type)
u DIN Standard Gland Packing Globe Valve
u DIN Globe valve
u DIN Stop valve
u DIN Absperrventil Durchgangsform
u DIN Válvulas de globo
u DIN ventil uzavírací s klasickou ucpávkou přímý
u DIN Standard seteventiler med pakkboks (rett løp modell)
u DIN Standardında Salmastra Baskılı Glob Vana(Düz Tip)
u Van cầu chuẩn DIN (kiểu góc)
ETM Code No. : ETM FIG.S.150,ETM FIG.S.151,ETM FIG.S.152
This ETM globe valve can be used in Industry, Powerstations, Flue gas purification plant, processing technology, gas supply, vapor facilities, thermal oil applications, recycling facilities, vacuum facilities, ammonia, hot water, heating technology, district heating, cooling and freezing systems, general plant manufacturing, steam systems. This type valve is maintenance-free and like all ETM valves – is classed leak rate “A” in accordance with EN 12266-1.
Products:
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 16 Bar with Flanges According to DIN EN 1092-1
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 25 Bar with Flanges According to DIN EN 1092-1
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 40 Bar with Flanges According to DIN EN 1092-1
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 16 Bar with Butt Weld Ends According to DIN EN 12627
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 25 Bar with Butt Weld Ends According to DIN EN 12627
u ETM-FIGURE S-BS/EN Standard gland packing globe valve PN 40 Bar with Butt Weld Ends According to DIN EN 12627
Material Equivalence:
EN Material Name———————–EN Number ————Forgings—————–ASTM Material——————-Forgings
EN 10213 GP240GH———————1.0619——————1.0460—————–ASTM A216 WCB—————–A105
EN 10213 G20Mo5———————–1.6220——————1.0437—————–ASTM A352 LCB——————A352 LF2
EN 10213 G17CrMo5-5——————1.7357——————1.7335—————–ASTM A217 WC6—————–A182 F11
EN 10213 G17CrMo9-10—————-1.7379——————1.7380 —————-ASTM A217 WC9—————–A182 F22
EN 10213 GX5CrNi19-10—————-1.4308——————1.4301—————–ASTM A351 CF8—————–A182 F304
EN 10213 GX5CrNi19-11-2————-1.4408 —————–1.4401—————–ASTM A351 CF8M—————-A182 F316
Features:
u Cast steel PN10 ,PN16,PN25,PN40– DN15 to DN400
u Straight-through
u Easy operating handwheel with safe operation at all working temperatures
u Solid plug made of stainless material
u Solid stem make of stainless material
u Stem sealing in graphite Raised, turning stem
u Back sealed stem Welded seat in stellite or Cr-steel
u High-tensile Gland Packing Self adjusted gland
u Flat Disc ,Parabolic & Regulation disc , Soft Seated Disc, Cone Disc, Stop Check Disc, Double Stage Disc & Balance Disc
Mediums:
Standard: Steam, gases, hot water, thermal fluids, hot oil, process water, etc.
Stainless Steel: Process water, aggressive media, etc.
Requirements and testing:
u The test are carried out according to DIN EN12266-1
u Shell test : nominal pressure (PN)X1.5
u Tightness of seat :nominal pressure (PN)X1.1
u Certificate of conformity in according to with PN-EN10204
u Design according to PN-EN12516-2
u Valves have been submitted for appraisal of conformity according to the directive pressure equipment directive 97/23/EC.
Installation:
u They can be installed on pipelines in a vertical or horizontal and operation only
u Direction of flow see body mark
Connection:
u Butt-Welded according to DIN EN12627; Flanged according to EN1092-1 or to customer request
u Face to face dimensions according to EN558-1 1 Series (DIN3202 F1 Series)
Operation:
u Handwheel (If required)
u Electric actuator
u Gear box
u Flange ISO5210 (Ready for actuator)
Gate Valves (F7 Type),DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ),DIN F7 Gate valve,DIN Absperrschieber F7,DIN Válvulas de compuerta F7,DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26,DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1, bygge lengde serie 26),DIN Standardında F7 Sürgülü Vana,Van cổng chuẩn DIN kiểu F7
Swing Check Valve,DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1),DIN F6 Swing check valve,DIN F1 Swing check valve,DIN Rückschlagklappe,DIN Válvula de retención clapeta oscilante,DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1,DIN Standard Sving-klaff tilbakeslagsventil (Lengde iht. to DIN EN 558-1, bygge lengde serie 48 & serie 1),DIN Standardında Çalpara Çek Valf,Van 1 chiều lá lật chuẩn DIN
The watering system consists of two parts. This is the manifold part of the system – this is the part that goes out in the garden. The other part is the faucet part – which is the part that is connected to the faucet.
The manifold part has a flow sensor on the input, and a solenoid valve on each of the 48 outputs. It is then possible to adjust the amount of water fed to each plant/tree.
When the watering system starts, the manifold part request the faucet part to turn on the water via a rf2g4 module.
The faucet part can also control a water pump so I can use collected rain water from my cistern.
For this test the first output was set to 0.1l, the second to 0.2l, the third for 0.3l…. The tenth for 1l, the eleventh for 0.1l,thr twelfth for 0.2l, and so on, ending with 0.8l on the 48th output.
Now the only thing missing is the summer…
And thanks to my friend John for making the actual manifold from two 50x50x1000mm nylon blocks that is then boltet together.
https://goo.gl/photos/R2VyNdxpbmSHVW5cA
