Reliable Supplier TU-1C06 thermal wax actuator for thermostatic automatic water drain valve for Slovak Republic Importers
Short Description:
Product Detail
Product Tags
Reliable Supplier TU-1C06 thermal wax actuator for thermostatic automatic water drain valve for Slovak Republic Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Reliable Supplier TU-1C06 thermal wax actuator for thermostatic automatic water drain valve for Slovak Republic Importers, The product will supply to all over the world, such as: Jordan , Muscat , Turkey , Now, with the development of internet, and the trend of internationalization, we have decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.
***VISIT OUR SPONSORS***
https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com
This video covers the 3 port valve. In particular its position in a Y plan system. We also cover the basics of installing or replaceing a three port valve or head. For more information visit https://www.plumberparts.co.uk
Hello and welcome to this Plumberparts video. Today, I’m going to tell you about 3-port valves that position the heating system and how to install their control heads. Basically, giving you a brief explanation. If you want anymore detailed information you’ll have to contact us and go to our website at plumberparts.co.uk. Let’s first have a look at the position of the 3-port valve in the heating system. This pipe here is the flow from our boiler, okay? It comes up here through the pump, is pumped up through this pipe here to our 3-port valve here, Okay? Now what the 3-port valve then does is divert hot water, either through here into the coil of the hot water tank and back out to the boiler, or, through here, which is off down to the heating system, okay, to the radiators.
Now it does that according to whether it is being controlled by either the thermostat on the side of the tank, this side, or your thermostat in your room. Now, we should send it off down this side. Now that might sound simple enough but the complication comes in when you try to wire them in. For most heating engineers like me, or other people who are experienced in this, it’s an easy thing to do. But if you don’t know what you are doing, you can easily get in an electric shock, or the system just won’t work properly at all. Now only do this if you know what you’re doing and you’re competent with electric, okay, and you have a tester. For God’s sake don’t touch anything that you haven’t tested first, okay?
So here’s the control box. I’m just going to remove this cover. Right. So that is why you take the cover off and you look at that and you say, oh, my God, what is going on here? Once you isolate each wire, find out what it does, then you’re in a much better position, okay, and you’ll be able to figure it out a bit easier, with any luck. Now we can have a look at this. This is our replacement head, okay. But, I’ll tell you what these wires do and basically how this works, okay, becomes sometimes there can be confusing the three-port valve type because when it’s only on heating, it has to have a separate live that keeps the boiler and pump on, okay? Now, so what we have here is pretty simple. We have our standard wire here, this is our earth wire. That goes into the earth. This is our neutral, okay? Now these two here are our signal wires, okay. Now, on a two-port valve you have a live earth and a neutral, okay, and then a switch live and then a switched out, okay?
So when, what happens is, is your two-port valve is livened up the motor moves round, clicks a switch, and then it turns that switch live on back to the boiler and the pump. Now, with a 3-port valve, it’s a bit different. You’ve got your live, uh, your neutral and your earth, okay? Right, and then you have a live on, you have two lives here, okay. Now these get livened up according to what services you’re looking for, okay? And they also move the motor around, right. So, say your white is your hot water, and your heating is your grey, okay, say the white moves around, the motor moves around, and then what it does, it switches the live that goes through the white, through the motor and then back out on this orange off to the boiler and the pump, right?
Similarly, it works in exactly the same way for the heating system. Say it comes down, the heating system comes on, it gets signalled by the programmer, it goes through the thermostat in the room, comes back, switches down here, opens the valve, the valve makes, and then it livens up back down here, off to your boiler and your pump, to tell them to come on. The idea of having a switch in one of these motors to tell the boiler or the pump to come on, is so the boiler and the pump doesn’t run when there’s no flow to go to, okay. Which could result in
the boiler overheating, sections cracking, heating systems over-pressurizing, and loads of problems like that, Okay?
I hope you found this video somewhat informative and opens your eyes a little bit more to how 3-port valves work, where they’re on the system, and why they’re so important for diverting heat to the certain areas according to the thermostats that are calling for those areas to have heat. If you want anymore advice or anymore information, go to our website at plumberparts.co.uk, message on YouTube, or get hold of us through that website. I hope to see you again, and keep up to date with us, and see you soon. Thanks very much. Bye-bye.
Created on March 28, 2012 using FlipShare.
