Renewable Design for TU-029 thermostatic cartridge wax sensor for sanitary ware Export to Kenya
Short Description:
Product Detail
Product Tags
Renewable Design for TU-029 thermostatic cartridge wax sensor for sanitary ware Export to Kenya Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Reliable good quality and very good credit standing are our principles, which will help us at a top-ranking position. Adhering to your tenet of "quality 1st, purchaser supreme" for Renewable Design for TU-029 thermostatic cartridge wax sensor for sanitary ware Export to Kenya, The product will supply to all over the world, such as: New Zealand , Mauritius , Denver , We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!
Fragen an: kuck_der_hueb@web.de oder aufhttps://turbo-sprayer.de.tl/TFSI-TSI-EINLASS-VENTILE-REINIGEN-BeDi-valve-cleaning.htm
Die Reinigung (decarbonising) von verkokten Einlassventilen und Drosselklappen (hier beim 2.0 TFSI EA 113) Direkteinpritzer erfolgt mittels Hochdruckpumpe mit spezieller Einspritzdüse und Liqui Moly Ventil Reiniger.
Dazu wird ein Reinigungsgemisch ca. (75ml Liqui Moly / 400ml Benzin) in mehreren Druchgängen direkt in die Ansaugbrücke eingesprüht.
Dadurch werden Verkokungen und Ablagerungen schonend gelöst und mit verbrannt.
Warum verschmutzen Direkteinspritzermotoren?
Bei allen Fuel Direct injection / FSI und TFSI von Audi (R4 V8 V10), VW, Opel Turbo, BMW 335i, Porsche usw. gelangen Öldämpfe und Blow By Gase durch die Kurbelgehäuseentlüftung (KGE) und die Ventilüberschneidung / internes AGR in den Ansaugtrakt.
Dadurch lagert sich einiges an Ölschlam an den Ventilen und der Drosselklappe ab, welcher dort mit der Zeit verkoken und Leistungsverlust, sowie unrunden Leerlauf verursachen wird.
Die Verbrennungsrückstände an Drosselklappe und den Ventilen führt zu vermindertem Durchlass, Mehrverbrauch, unrundem Leerlauf und erhöhten Verschleiß der Ventile / Schäfte.
Ihr solltet eine Reinigung der Venitle / Drosselklappe, präventiv alle 20-30 TKm druchführen.
Firmen wie BEDI; Lambda und Tunap lassen sich genau diese Reinigung fürstlich bezahlen. Dann lieber selber machen….
!Wichtig!
Nur Liqui Moly, Lamda Reiniger oder Tunap Produkete benutzen. Bitte kein Seafoam oder ähnliches Zeug verwenden!!!
INSTRUCTIONS: The cleaning of the intake valves / throttle the 2.0 TFSI (EA 113) Direkteinpritzer by means of a high pressure pump with special Liqui Moly injector and valve cleaner. For this, a cleaning mixture (LM / petrol) is sprayed into several Druchgängen directly into the intake manifold. Thus, the deposits are gently released and burned.
Why pollute direct-injection?
For all direct fuel injection / FSI and TFSI Audi VW VAG etc. (also my Cupra R;-)) are deposited by oil fumes / blow-by gas contamination on the valves and the throttle valve, which carbonize there with time.
This is a design related problem of direct injection, because the valves are not lapped by gasoline and the crankcase ventilation is initiated directly in front of the cylinder head.
The combustion residue on the valve and the valves leading to reduced transmission, consumption, irregular idling and increased wear of valves / stems.
For heavy soiling of the valves no longer close them from close and overheating and engine damage by burning the valves / seat rings are the result.
I unfortunately can not make recordings endoscope, as this is only due to see, but can say that cleaning is clearly visible, which is also confirmed by the idle fuel consumption.
You should druchführen every 20-30 TKm cleaning the Venitle / throttle. Companies like BEDI; lambda and Tunap can be exactly this purification pay handsomely. Better to do it yourself ….
