Special Design for Electric Wax Series for Bahrain Importers
Short Description:
Product Detail
Product Tags
Special Design for Electric Wax Series for Bahrain Importers Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
Every single member from our large efficiency revenue team values customers' wants and company communication for Special Design for Electric Wax Series for Bahrain Importers, The product will supply to all over the world, such as: Madras , Bangkok , Jersey , At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
Production Amount per Day:
560 ⇒ 940 pieces: ⇒ Productivity Improvement of 68%
https://www.intelligentactuator.com/reduce-manufacturing-costs-ct-effects/
[Equipment Overview]
An apparatus for applying an adhesive to the cover of lamp lights and an indicator light in the manufacturing of electronic components.
X-axis: RCP2-SA7C
Y-axis: RCP2-SA7C
Z axis: ISB-MXL
Dispensing of the adhesive: RCP2-RA10C
[Problems of the air cylinder used]
1: They were dispensing the adhesive by using the air cylinder. The dispensing rate was changed because the air pressure was unstable and the adhesive was interrupted or lumped.
2: The viscosity of the adhesive changes under the conditions such as temperature, so that it took time to adjust the dispensing pressure.
3: Defective parts were made when the adhesive that attached to the work parts formed adhesive strings that weren’t cut off after dispensing.
[Benefits of the electric actuator]
The 45 seconds cycle time has been reduced to 30 seconds because the amount of adhesive dispensed always stayed stable.
This enabled the supply of adhesive to be stable all day after trial testing each morning.
The failure rate due to adhesive dispensing reduced to almost zero from about 10 pieces a day since they set movement to cut clean the dispensed adhesive.
This movement was of the electric actuator in the vertical direction and the slide table.
Project Comparison / Equipment with the air cylinder / Equipment with the ROBO Cylinder
Cycle Time / 45 seconds / 30 seconds
Duration of Choco-Tei per event / 60 minutes per day / 60 minutes per day
Production per day / 560 pieces(*1) / 940 pieces(*2)
(*1) When the air cylinder was used: (8 hours – 1 hour Choco-Tei) ÷ 45 seconds = 560 pieces per day
(*2) When the ROBO Cylinder was used: (8 hours – 10 minutes) ÷ 30 seconds = 940 pieces per day
Actuators
RCP2-SA7C (2 axes) / PSEL / RCP2-RA10C
Controllers:
PCON-CFA / ISB-MXL / XSEL
https://iaiquality.com/2014/06/26/adhesive-applicator-ct-effects-application-example/
“This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.
For information please visit https://owners.nissanusa.com/nowners/. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!
Whenever the rear air conditioning screen is displayed on the monitor, the front seat occupants have control of both the front and rear climate controls.
To operate the rear climate control from the front seat:
● First, turn on the front climate control by pressing the ON/OFF button.
● Next, turn on the Rear Climate Control system by pressing the REAR button on the front climate control panel. The REAR button indicator light will illuminate and “Rear Air-conditioning” will be displayed on the monitor.
● With “Rear Air-conditioning” displayed on the monitor, front occupants have control of both the front and rear climate control:
◦ Turn the temperature control dial to adjust the rear temperature
setting.
◦ Rotate the fan speed dial to adjust the fan speed up or down.
To turn OFF the rear climate control from the front seat:
● Press the REAR button until the “Rear Air-conditioning” display is shown. The REAR button indicator remains illuminated.
● Press the OFF button. The REAR button indicator on the front climate control panel will turn OFF, and the rear climate control also turns OFF.
Rear seat occupants can also adjust and control rear seat temperatures. To operate the rear climate control from the second-row seat:
● The front climate control system must be on.
● Rear climate control operation is available when the front monitor screen shows any display other than “Rear Air-conditioning”.
● To turn on the rear climate control, press the AUTO or either fan speed control button on the rear climate control panel.
● Press the PLUS or MINUS button to increase or decrease the fan speed.
● Press the UP arrow or DOWN arrow to adjust the temperature.
● Press the OFF button to turn the system off.
If the second-row passenger turns the rear climate control system ON, the REAR indicator light on the front climate control panel illuminates.
The front seat occupants can regain control of the rear climate control by pressing the REAR button on the front climate control panel.
After regaining control, the front seat occupants now have control to change the rear climate control fan speed and temperature or to turn the system OFF.
Please see your Owner’s Manual for important safety information, system limitations and additional operating information.
”
