Top Quality TU-1J04 thermal wax actuator for electric switch valve to Bulgaria Factory
Short Description:
Product Detail
Product Tags
Top Quality TU-1J04 thermal wax actuator for electric switch valve to Bulgaria Factory Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We stay with the basic principle of "quality initially, services first, steady improvement and innovation to fulfill the customers" for your management and "zero defect, zero complaints" as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Top Quality TU-1J04 thermal wax actuator for electric switch valve to Bulgaria Factory, The product will supply to all over the world, such as: Paraguay , Lyon , Puerto Rico , Our company absorbs new ideas, strict quality control, a full range of service tracking, and adhere to make high-quality products. Our business aims to "honest and trustworthy, favorable price, customer first", so we won the trust of the majority of customers! If you are interested in our products and services, please do not hesitate to contact us!
I used a fan to control the temperature of a room. When the LM34 temperature sensor gets above a set temperature recorded on the Arduino Duemilanove, it will do two things. One, it will activate the solid state relay and this will turn on the fan from the external power source. Secondly, it will log the time and store it on an internal stack on the micro-conroller. When the fan is turned on this will be signaled by a LED turning on. You will be able to cycle through the last three times the fan was activated by pressing a button connected to the micro-controller and this will be shown on the LCD screen.
Did you know, an electric water heater can account for up to 25% of a home’s energy bill? The United States Department of Energy recommends setting a residential water heater to 120ᵒ F to reduce energy usage and to help prevent scalding. Each 10ᵒ F reduction in water temperature can save 3% – 5% on an energy bill. Save energy and help make the home safer by reducing the thermostat setting on residential water heaters.
Justin Holzgrove, PUD 3 Conservation Manager, demonstrates how to check and adjust water heater temperature in this video.
To Check and Adjust Water Heater Temperature:
TOOLS NEEDED: a flat head screwdriver and a regular home cooking thermometer.
1. Turn on the hot water at the faucet CLOSEST to the water heater. This may be in a bathroom, laundry room, kitchen, etc. Let it run for at least three minutes to ensure water is coming directly from the water heater tank.
2. Measure the water temperature using the cooking thermometer. It may be easier to place a small cup below the faucet.
3. Turn off the water heater breaker at the home’s electric panel. This should be done prior to making any adjustments.
4. Locate the water heater access panels. Many water heaters have a top and bottom element. Both should be adjusted to the same temperature.
5. Remove the water heater access panel. Insulation may need to be removed to access the thermostat. If so, consider wearing gloves. Do not remove the plastic cover on the thermostat.
6. Using the flat head screwdriver, adjust the temperature down to 120ᵒ F. The thermostat may not have the setting in degrees. Instead it may use terms such as “HOT” and “COLD”. Adjust accordingly.
7. Replace the access panels and turn on the circuit breaker to re-energize the water heater.
8. Wait three hours before testing again to allow changes to take effect.
9. Re-measure the water temperature.
Washington State law (RCW 19.27A.060) requires that new residential water heaters sold in the state be pre-set at 120ᵒ F. Mason County PUD No. 3 is required to notify customers annually that state law recommends their water heaters should be set no higher than 120ᵒ F. Furthermore, when a home is sold or rented, the previous owners or agent must set the water heater back to 120ᵒ F before the next resident’s occupancy.
From a safety and cost-savings standpoint, lowering the temperature makes a lot of sense.
Temperature of water in relation to the time it takes to cause a bad burn:
150°F (66°C) – 2 SECONDS
140°F (60°C) – 6 seconds
125°F (52°C) – 2 minutes
120°F (49°C) – 10 MINUTES
For Questions or Comments, please contact the Mason County PUD No. 3 Conservation Department at (360) 426-0777 or email web@masonpud3.org
