Top Suppliers Electric Wax Series for Zurich Factories
Short Description:
Product Detail
Product Tags
Top Suppliers Electric Wax Series for Zurich Factories Detail:
(1) Special Seal Wax for Electronic Elements
This series of products have very good moisture proof capability and good capability for enduring temperature changed. Its’ hardness and viscosity are temperate, and it’s pliability and plasticity are well. They have excellent electrical property parameters. Their high frequency loss is few. They have no any corrosion. Their various processing property are stable.
This series of products are mainly applicable for dipping electrical coil such as electronic tuner coil, various oscillator coils, adjustable inductance electronic component, electronic transformer and color TV luminance delay，thermal seal to some materials.
(2) Dipping Seal wax for Various Capacitors
This series of products have eight grades, which their common characteristic are excellent insulating property, well moisture proof capability, low loss, well compatibility and oxidation resistance. The drop melting point from 65℃ to 145℃, can be adapt to the demands for insulating envelopments with different ranges.
This series of products are mainly applicable for dipping envelopment of the electronic elements such as line-motivating transformer, color TV delay coil, various film and paper capacitor, porcelain capacitor, etc.
(3) Sealing wax for Power Capacitor
This series of products have outstanding insulation impedance and low loss. They have a suitable air-absorption capacity and appearance surface. Their performance is stable. They have a suitable hardness and viscosity, non-poisonous, tasteless and low acid value.
This series of products are mainly applicable for dipping & seal of the metallic capacitor such as the low-voltage power capacitor, alternating current capacitor, household appliances capacitor, etc.
Product detail pictures:
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for Top Suppliers Electric Wax Series for Zurich Factories, The product will supply to all over the world, such as: Barcelona , Costa rica , Nigeria , After 13 years of researching and developing products, our brand can represent wide range of products with outstanding quality in world market. We have completed big contracts from many countries such as Germany, Israel, Ukraine, United Kingdom, Italy, Argentina, France, Brazil, and so on. You probably feel secure and satisfy when copperate with us.
https://w34.us/amz/B00AY9HJ10 A blowoff valve (BOV) or dump valve is a pressure release system present in most turbocharged engines. Its purpose is to prevent compressor surge, and reduce wear on the turbocharger and engine. Blowoff valves relieve the damaging effects of compressor “surge loading” by allowing the compressed air to vent to the atmosphere, making a distinct hissing sound, or recirculate into the intake upstream of the compressor inlet.
Hooked up correctly a BOV can hold pressure, and only open on vacuum. Hooked up as a relief valve it will open when pressure from the turbo gets too high.
In the case where a mass airflow sensor (MAF) is used and is located upstream from the blowoff valve, the engine control unit (ECU) will inject excess fuel because the atmospherically vented air is not subtracted from the intake charge measurements. The engine then briefly operates with a fuel-rich mixture after each valve actuation.
The rich mixing can lead to hesitation or even stalling of the engine when the throttle is closed, a situation that worsens with higher boost pressures. Occasional events of this type may be only a nuisance, but frequent events can eventually foul the spark plugs and destroy the catalytic converter, as the inefficiently combusted fuel produces soot (excess carbon) and unburned fuel in the exhaust flow can produce soot in the converter and drive the converter beyond its normal operating temperature range.
An alternative method for utilizing both a MAF and a blowoff valve is to have the MAF located down stream between the intercooler and the throttle plate. This is known as Blow-through rather than the traditional Draw-through set up. Care must be taken as to the position of the MAF to prevent damage to the sensitive element. For example, on a SR20DET motor, the MAF must be at least 12″ from the throttle plate, and the blowoff valve must be 6″ from the MAF sensor. By using a blow-through method, the MAF won’t be affected by the blowoff valve opening as the pressure is vented before the air reaches the MAF.
One approach used to mitigate the problem has been to reduce the boost pressure, which reduces the required venting volume and yields less charge over-calculation by the ECU. The air can also be recirculated back into the intake, a typical stock setup for cars with an upstream MAF sensor. The situation can also be corrected by switching the fuel metering system over to a manifold absolute pressure sensor, a conversion that usually requires a compatible aftermarket ECU or piggy-back fuel controller. The MAP sensor monitors the absolute pressure in the manifold at all times and will correctly detect the change that occurs when the valve vents, allowing the ECU to reduce fuel metering accordingly.
