Wholesale Distributors for Thermostatic Wax Series to Los Angeles Manufacturer
Short Description:
Product Detail
Product Tags
Wholesale Distributors for Thermostatic Wax Series to Los Angeles Manufacturer Detail:
The characteristic of Thermostatic Wax consists of its volume expansion amount can reach up to 13 ~ 15 % when it is heated from solid to liquid. We use this characteristic, when it is heated to a solid-liquid transformation, its’ heat energy can translate into mechanical energy. Thermostatic Wax has been widely applied to temperature auto regulation of thermal-driving and various thermal-starting devices.
For example, automobile thermostat has been most widely well known, it has cylindrical seal part that loads some Thermostatic Waxes inside. To realize automatic temperature control, it was designed by a special technical specification for the solid-liquid transformation of Thermostatic Wax. When the cylindrical part is heated, Thermostatic Wax in the part is also heated and making a solid-liquid transformation expansion, Thermostatic Wax pushes thermostat’s itself handspike to open the valve. When the cylindrical part gets cold, Thermostatic Wax also cooled and start to shrink, Thermostatic Wax pushes itself handspike back to original situation under the return load force to close up the valve to realize automatic temperature control.
Depending on the main principle of Thermostatic Wax, The developed thermal driving devices and thermostats have been widely applied to automobile thermostat, automobile temperature-control switch for electric fan, various engines cooling water temperature auto controller, lubricant oil temperature auto control, auto cycle enriching valve, industry electric power control valve, water temperature regulating valve, safety device, space heating, fire protection, air filtering, temperature regulating device, sanitary ware and heating temperature controlling valve, air temperature control, ventilating control, solar water heater, automatic door and window, thermal driving electric switch, alarm apparatus, house ventilating, radiator temperature control valve, hot landing device for aviation and automaton etc.
Within temperature control range of –20 ~ 180 ℃ of Thermostatic Wax may compound with different temperature range and different efficient distance according to client’s technical demand. Our company may offer the relative technical service.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
|||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
||
|
B100 |
Powder, Slice , Column |
90/100 |
≥10 |
Non. |
Non. |
|
B105 |
Powder, Slice , Column |
95/105 |
≥10 |
Non. |
Non. |
|
B110 |
Powder, Slice , Column |
100/110 |
≥10 |
Non. |
Non. |
|
B115 |
Powder, Slice , Column |
105/115 |
≥10 |
Non. |
Non. |
|
B120 |
Powder, Slice , Column |
110/120 |
≥10 |
Non. |
Non. |
|
B125 |
Powder, Slice , Column |
115/125 |
≥10 |
Non. |
Non. |
|
B130 |
Powder, Slice , Column |
120/130 |
≥10 |
Non. |
Non. |
|
B135 |
Powder, Slice , Column |
125/135 |
≥10 |
Non. |
Non. |
|
B140 |
Powder, Slice , Column |
130/140 |
≥10 |
Non. |
Non. |
|
B145 |
Powder, Slice , Column |
135/145 |
≥10 |
Non. |
Non. |
|
B150 |
Powder, Slice , Column |
140/150 |
≥10 |
Non. |
Non. |
|
B155 |
Powder, Slice , Column |
145/155 |
≥10 |
Non. |
Non. |
|
B160 |
Powder, Slice , Column |
150/160 |
≥10 |
Non. |
Non. |
|
B165 |
Powder, Slice , Column |
155/165 |
≥10 |
Non. |
Non. |
|
B170 |
Powder, Slice , Column |
160/170 |
≥10 |
Non. |
Non. |
|
B175 |
Powder, Slice , Column |
165/175 |
≥10 |
Non. |
Non. |
|
B180 |
Powder, Slice , Column |
170/180 |
≥10 |
Non. |
Non |
Product detail pictures:
Persisting in "High top quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with customers from the two overseas and domestically and get new and aged clients' large comments for Wholesale Distributors for Thermostatic Wax Series to Los Angeles Manufacturer, The product will supply to all over the world, such as: Hungary , Jakarta , Sri Lanka , The president and all the company members would like to provide qualified goods and services for customers and sincerely welcome and cooperate with all native and foreign customers for a bright future.
***VISIT OUR SPONSORS***
https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com
***WEBSITE***
https://www.plumberparts.co.uk
***Facebook***
https://www.facebook.com/profile.php?id=100001119410854
***Twitter***
https://twitter.com/#!/plumberparts
This video covers how to chase pipes into a wall or floor screed. Enjoy!
Today we are looking into screeding, I also have to sink pipes into a wall. Now, this was suggested to us by a lovely man on Twitter, I think he was called “disco dimmer” or something like that. His question’s appearing in the screen below me right now. So, anyway, as you can see, we’ve got lovely chase here, it’s been chased down lovingly by Gavin. And if you look closely, we can see, the more you start, this is basically coming out with a grinder. And I’m sure all along, he wore gloves, and he wore goggles and mask. And basically, he’s ground it out, ground it out of there. And then used an SDS router or a chisel, to just gut all this all out, and then sweep all that away. We look at the floor, we can see that he’s made a lovely little screen out just here. We get down, and have a quick look, we’re gonna see that it’s quite deep screen. So we’ve got good sort of, 40 or 50 mil there. And also, if you look here as well, we’ve got a pipe in here. You see, that’s nice and deep there as well. We’ve got a hell of a lot of room. So the thing you’ve got to think about, that’s really important when it comes to sinking pipes into the wall, is obviously the depth of the wall itself, how you’re gonna fix the pipe, so when someone comes over to render this wall, or plaster it or anything like that, that the pipes aren’t gonna move. And also, really, really, importantly, there how you’re going to try to insulate your copper pipe. Now, there’s kind of two ways you can attack it. You can either insulate it to stop the heat getting out, which is obviously a brilliant way, and also kills two birds with one stone. This is very important that the concrete, or any kind of render, doesn’t touch the copper itself, ’cause it can rot through it. So, hopefully, depending on the depth of the screed, we should be allowed to fit in this nice 15 mil by 30 mil wall. And it’s still got enough depth to then be able to render over that. Sometimes you’re trying to sink pipe into a single brace stop wall, which is only as much as four inches deep sometimes. When that happens, you’re gonna want to dig out a pipe there, and then basically gaffer tape up the pipe. We find that that helps to stop anything kind of climbing onto the pipe when it’s drying out.
Basically, what we’re gonna do is, I’ve got some double clips. We’re gonna pop a few double clips in down here, get our pipes laid out in the bottom, and basically get our pipes up in the thing, ready for Gavin to come over here in a few days’ time, to render up, and then we’ll be fitting the radiator back on in a couple of weeks. So yeah, let’s do that now, and I hope you enjoy it. We’ll have just a quick look here, at the depth that we’ve got. See if we can give him enough clearance. I mean, that is lovely. So we can get a nice pipe round there, we’re gonna screen over the top of that, absolute treat. This is going up through the wall, and then out at the top, it’s gonna elbow sort of back over up in the loft space. Just gonna put the elbow there now. Pop that through on up. Ah, look at that. Huge amount of space, there, now. Well, it’s now just a matter of getting our lovely insulation on. So we’re gonna get a bit on like that, now where the clips are, we’re not gonna put any on, okay? Because the width of the insulation, when there’s two next to each other, is quite tight.
Okay? So now we’re gonna do that.
So, then, like I was saying, there are other ways. Okay, if you’ve got an issue with depth, okay, you haven’t got the room. Now, let’s say, the old days what they used to do, is they’d actually get newspaper and wrap it around it. Anything to stop the concrete actually touching the pipe while it’s wet, okay? And also touching it later on as well, ’cause it does go through pipe. I’ve always found a really good way to do that, is basically, gaffer tape. Gaffer tape is, you pop it down here like so, wrap it around. Then you know now, that nothing’s gonna actually get on your pipe. And the same goes for the floor. Now, if I were to wrap as well, a couple of wraps around, and make sure there’s a couple little ridges as well. So, it’s really sort of free to move as it wants. And once that’s there, and all that, there’s no way that’s ever gonna cling on there, or anything like that. There’s a nice little bit of room in there, as well, it sort of protects the pipe a little bit, so that’s, I said, the other way. So, a closer look at that.
This is what happens in the funeral home before the family arrives to view the body of their loved ones!
