100% Original Factory Low Temperature Wax to Mombasa Manufacturers
Short Description:
Product Detail
Product Tags
100% Original Factory Low Temperature Wax to Mombasa Manufacturers Detail:
Automatic Temperature Regulating Agent Series is a kind of thermal expansion materials, which depends on principles that the substance expands when it is heated and constricts when it is cooled and a liquid is incompressible. It can automatically regulate temperature. When the ambient temperature goes up to the special value, Automatic Temperature Regulating Agent goes up to the special temperature with the ambient temperature, its unit volume increases. When the ambient temperature falls down to special value, Automatic Temperature Regulating Agent also falls down to the special temperature with the ambient temperature, its unit volume reduces. The agent is loaded in the purpose-made thermostatic element. The variation of ambient temperature takes a pressure and the thermostatic element takes a change, and this change brings the movement of either the appurtenance of the thermodynamic component or itself, thereby carrying out the automatic opening & closing function. All sorts of temperature controllers and the electrical switches are developed depending on the physical feature of Automatic Temperature Regulating Agent. It has been widely used in the fields of refrigeration, auto-control system, automobile industry, petrochemical industry, sanitary ware, heating and ventilating, electric electron, building, space & aviation etc.
|
Model Number |
Appearance (Normal Temperature) |
Quality Standard |
||||||
|
Range of Temperature Control |
Effective Distance Travel |
Water-Solubility Acid and Alkali |
Mechanical Impurity |
|||||
|
A30-1 |
Powder, Cream |
30/40 |
7 |
Non. |
Non. |
|||
|
A30-2 |
Powder, Cream |
30/40 |
10 |
Non. |
Non. |
|||
|
A30-3 |
Powder, Cream |
3045 |
10 |
Non. |
Non. |
|||
|
A30-4 |
Powder, Cream |
30/60 |
8 |
Non. |
Non. |
|||
|
A30-5 |
Powder, Cream |
30/65 |
4 |
Non. |
Non. |
|||
|
A30-6 |
Powder, Cream |
30/85 |
10 |
Non. |
Non. |
|||
|
A32 |
Powder, Cream |
32/60 |
4 |
Non. |
Non. |
|||
|
A33 |
Powder, Cream |
33/45 |
6 |
Non. |
Non. |
|||
|
A35 |
Powder, Cream |
35/45 |
5 |
Non. |
Non. |
|||
|
A35-1 |
Powder, Cream |
35/45 |
10 |
Non. |
Non. |
|||
|
A35-2 |
Powder, Cream |
35/50 |
8 |
Non. |
Non. |
|||
|
A36 |
Powder, Slice , Column |
36/62 |
5.5 |
Non. |
Non. |
|||
|
A37 |
Powder, Slice , Column |
37/47 |
9 |
Non. |
Non. |
|||
|
A38 |
Powder, Slice , Column |
38/50 |
7 |
Non. |
Non. |
|||
|
A40 |
Powder, Slice , Column |
40/50 |
7 |
Non. |
Non. |
|||
|
A40-1 |
Powder, Slice , Column |
40/50 |
10 |
Non. |
Non. |
|||
|
A40-2 |
Powder, Slice , Column |
40/64 |
4 |
Non. |
Non. |
|||
|
A40-3 |
Powder, Slice , Column |
40/80 |
8 |
Non. |
Non. |
|||
|
A42 |
Powder, Slice , Column |
42/68 |
5 |
Non. |
Non. |
|||
|
A43 |
Powder, Slice , Column |
43/48 |
6 |
Non. |
Non. |
|||
|
A43-1 |
Powder, Slice , Column |
43/55 |
7 |
Non. |
Non. |
|||
Product detail pictures:
Our team through qualified training. Skilled professional knowledge, powerful sense of support, to satisfy the support desires of consumers for 100% Original Factory Low Temperature Wax to Mombasa Manufacturers, The product will supply to all over the world, such as: Malaysia , Guyana , Guatemala , Our products are very popular in the word, like South American, Africa, Asia and so on. Companies to "create first-class products" as the goal, and strive to provide customers with high quality products, provide high-quality after-sales service and technical support, and customer mutual benefit, create a better career and future!
On this video we have a Lincoln Towncar that has set a P1401 code. The OBD II system has set this code because it recognizes that something is wrong in the emission system. In this case it is the DPFE sensor that has gone bad. We show you the diagnostic procedure as well as replacing the faulty sensor.
The automobile consist of:
Powertrrain
1. Engine:
• Fuel System: Purpose is to deliver fuel to the engine. It consists of the fuel tank, pump, gauge/sensor, filter, pressure regulator and injectors.
• Air Intake System: Purpose is to clean and direct outside air into the engine. It consist of air filter, ducts, air plenum and intake manifold.
• Exhaust System: Purpose is to direct exhaust gasses out of combustion out of engine. It consists of the exhaust manifold, converters, pipes and mufflers.
• Cooling System: Purpose is to remove excess heat from the engine. It consists of water pump, hoses, radiator, thermostat, cooling fan and coolant recovery tank. Also the oil system serves as a cooling system as well as a lubricating system. It consist of oil pump, pan, filter and cooler.
Drivetrain:
1. Clutch: Purpose is to connect the engine and transmission together. It consists of clutch drive disc, driven disc, release bearing, clutch fork, cable, slave cylinder, master cylinder. There are three types of clutch systems: mechanical, cable and hydraulic.
2. Transmission: Purpose is to match engine speed to road speed. Two types used are manual or automatic. These consist of gears, linkages, cables and converters for automatics. A manual is connected to the clutch by a flywheel and automatic by a flexplate.
3. Driveshaft: Purpose is to connect the transmission to the rear axle. It consists of a slip yoke, shaft and universal joints.
4. Rear axle differential: Purpose is to change the angle of motion from engine to the wheels. It also divides torque between the wheels. It consists of a ring and pinion gear, carrier, bearings, crush sleeve and axle shafts.
5. Wheels/Tires: Purpose is to provide traction to the road as well as carry the weight of the vehicle.
Vehicle Control Systems:
1. Brakes: Purpose is to slow and stop the vehicle. It consists of master cylinder, brake booster (vacuum or hydraulic), calipers, drums, pads and rotors.
2. Steering: Purpose is to direct vehicle in the required direction. Consists of steering gear (rack & pinion), steering wheel, column, inner/outer tie rods, pump, reservoir, hoses and pipes.
3. Suspension: Purpose is to provide stability and handling while also providing comfort to the ride. Consists of shocks, struts, sway bars, end links, springs, trailing arms and bushings.
Comfort System:
1: Heating Ventilation Air Conditioning (HVAC): Heats and cools interior air to passenger comfort. Also circulates outside and inside air.
• Air Conditioning: Consist of condenser, compressor, accumulator (receiver/dryer) orifice, expansion valve, hoses, evaporator, controls, actuators and modules.
• Heating: Consists of heater core, valves, hoses and switches.
Electrical Systems:
1. Power Generation: Creates electrical power to run all the electrical systems. Consists of the alternator.
2. Power storage: Stores unused power to start the car and supply voltage to the alternator to create more electricity.
• Both systems consist of wiring, harnesses, fuse, relays and modules
Welcome to One Hour TV! This is Jim from One Hour Heating & Air Conditioning! Is your heating system blowing cold air… or your cooling system blowing hot air …
