Factory making TU-1J04 thermal wax actuator for industrial thermostatic water regulations mixing valve for Indonesia Manufacturers
Short Description:
Product Detail
Product Tags
Factory making TU-1J04 thermal wax actuator for industrial thermostatic water regulations mixing valve for Indonesia Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support for Factory making TU-1J04 thermal wax actuator for industrial thermostatic water regulations mixing valve for Indonesia Manufacturers, The product will supply to all over the world, such as: Singapore , Thailand , Rotterdam , We are fully aware of our customer's needs. We provide high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
Learn how to model, simulate and deploy capabilities with Simscape Fluids™.
Get a Free Simscape Trial: https://goo.gl/6372dP
Get Pricing Info: https://goo.gl/kDvGHt
Ready to Buy: https://goo.gl/vsIeA5
A backhoe arm with three hydraulic actuators is used to show some of the modeling, simulation, and deployment capabilities of
Hydraulic networks are defined within the Simulink® environment using Simscape™ physical connections. The hydraulic network is integrated with realistic loads modeled as 3D mechanical systems in Simscape Multibody™. Simulation tasks such as optimizing the design, tuning parameters, and hardware-in-the-loop testing are also shown.
With Simscape Fluids you can:
Model hydraulic systems with components such as valves, cylinders, and pipelines
Define custom valve models with configurable levels of fidelity
Create custom components with Simscape language
Automatically tune parameters of components to meet system requirements
Run simulations in real-time for HIL testing
Hydraulic systems vary widely in size and complexity. Simulating hydraulic networks together with mechanical and control systems is critical to optimizing system performance. To ensure that testing is efficient, Simscape Fluids offers a number of ways to easily balance the trade-off of model fidelity and simulation speed. The ability to generate C code from the model enables engineers to use Model-Based Design for the entire system (plant and controller).
Had the stabilizer control valve blow a spool almost completely out, far enough that it was raining oil at the back of the machine, I managed to get the stabilizer leg up far enough to get out of where we were working and to a spot to work on it. I decided to replace rather than repair the valve, I reasoned that even repaired the main components were still over 30 years old, I located a new one for an outstanding price from FP Smith https://www.fpsmitheq.com/. The orbital hydraulic steering valve has been leaking as long as we have had the machine and it would if you ran the machine long enough it would fill the steering column with oil and it would in turn leak out on to your lap.I located and bought a new steering valve with a new steering column from https://www.flinthyd.com/ for half the price Case or just about anyone else wanted new and the same as a used one. The brakes had a problem since we owned the 580, someone had put brake fluid in the system instead of TCH or Dexron ATF, needless to say it killed the rubber parts. To fix the brakes I bought a pair of Hyster fork truck master cylinders off of Ebay as well as a pair of new brake slave cylinders from https://www.reliableaftermarketpartsinc.com, the brakes will now use brake fluid and the parts cost less than one new original Case master cylinder. The parking brake has been non operational as long as we’ve had it, I freed the lever assembly and bought a new top quality U.S. made cable from https://www.terraparts.com/ for about half of what a new one from Case would cost.
All together with 5 new hoses for the steering valve the price of all the new parts with shipping was about $1350, not bad at all.
https://www.ebay.com/itm/A51976-Case-480-480B-480C-D-580B-580C-450C-Backhoe-Brake-Wheel-Slave-Cylinder-/320777550241?pt=BI_Heavy_Equipment_Parts&hash=item4aafd4f9a1
https://www.ebay.com/itm/HYSTER-FORKLIFT-MASTER-CYLINDER-PARTS-9827-1-INCH-BORE-/310654131203?pt=BI_Heavy_Equipment_Parts&hash=item48546ddc03
Broken brake line behind steering column, a small plate covers the lines, here is the link to the video showing the spot.
https://www.youtube.com/watch?v=lMyHHeIuKr4
