High Quality Industrial Factory TU-010 thermostatic cartridge wax sensor for sanitary ware for USA Manufacturers

Short Description:

Product Detail

Product Tags

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Concealed Thermostatic Shower Valve , Thermal Powered Actuator , Dishwasher Wax Motor , We take quality as the foundation of our success. Thus, we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.

High Quality Industrial Factory TU-010 thermostatic cartridge wax sensor for sanitary ware for USA Manufacturers Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.

Product detail pictures:

Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for High Quality Industrial Factory TU-010 thermostatic cartridge wax sensor for sanitary ware for USA Manufacturers, The product will supply to all over the world, such as: Kyrgyzstan , Ghana , Madagascar , Our market share of our products has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. We are looking forward to your inquiry and order.

Air Compressor Fittings to UK

Air Conditioner Parts India

Ignition Temperature Of Wax

Paraffin Wax Manufacturers price

Thermostat Radiator Discount

Wax Element to US

This is an update (Part 3/3) on my Koi Pond Air Lift Vacuum.

Jump To:

See First (Part 1/3) Video Here: https://www.youtube.com/watch?v=nhxTqjnOWSw
See Second (Part 2/3) Video Here: https://www.youtube.com/watch?v=lpfmmRigW8w

I made a Pond Vacuum for less than $20.00 with parts that I purchased from Lows. This is the second update video on the airlift pond vacuum. I believe that once I have this perfected I will be able to air lift nearly all of the debris from the bottom of my Koi Pond and catch it in a filter bag, returning the water back into my pond, and removing the waste in a bag for composting. As you can see in the video, I man need to look at other options for a filter media.

This is a DIY pond vacuum that anybody can quickly build as a day project as this first air lift vacuum took me less than 1 hour to put together from start to finish.

It works very similar to how an air lift pond pump works however it’s portable, easily mobile, and quite easy to use.

The most recent modifications that I made changed this from a low pressure, high volume airlift to a higher pressure, lower volume airlift with more of a jet action rather than a bubble action.

Today I demonstrate that I can air lift the water 8 to 10 inches from the top of the water. On a previous day, I measured a rate of approximately 12 gpm (Gallons Per Minute) using the current design. I believe that I can gain an even better performance than I currently have with a complete redesign (smaller lift pipe more air jet action).

Pain Strainer Used: https://www.lowes.com/pd_126394-968-11583/12FF_0__?productId=1008387&Ntt=paint+strainer&pl=1&currentURL=%3FNtt%3Dpaint%2Bstrainer&facetInfo=

I’m also going to thoroughly read through this Theses project (Performance Characteristics of Airlift Pumps with Vortex Induced by Tangential Fluid Injection) before I build/rebuild this vacuum again as I think this will help me to cut my experimentation time down quite a bit. https://digitalcommons.bucknell.edu/cgi/viewcontent.cgi?article=1027&context=honors_theses

All-in-all, I’m very happy with the performance of this DIY Air Lift Pond Vacuum and will continue to use this as an alternative to the high cost of commercially available pond vacuums on the market today.

More Ideas Coming Soon…Subscribe to stay tuned!

Label Hologram register stamping & die-cutting machine
Label Hologram register stamping & die-cutting machine is made by SHANGHAI CAREER PRINTING MACHINERY Co, Ltd. Using advanced label hot stamping & die-cutting manufacture technology, this advanced machine is designed by our self. The machine is used for hot stamping & die-cutting of pressure sensitive label, terylene diaphragm label and hologram register label.
This machine draws paper using interactive servo system, with advice that can vacuum and twice sensor registration. This machine can complete working procedure continuum, the working procedure is draws paper→ hot stamping（Hologram register stamping）→coating film → die-cutting →remove trash→ rewinder paper.
◆ Electric system operation using new digital interactive interface.
◆ Timing uses AC transducer, power config properly.
◆ Drive paper using interactive servo system, precision is ±0.15mm，time for regulate is very short, operation is simply.
◆ With twice sensor registrations, registrations fixing precision is ±0.15mm
◆ With advanced automatic control system, device stops when there is no paper or counter reach specify numbers.
◆ Heat device uses electric PID automatic temperature controller, with digital temperature shows.
◆ Hot stamping foil draws by powerful step motor, foil pull、rewinding controls precision, feeding device command from 0 to 99 times, it is suitable for many printing plates foil stamping.
◆ Hologram register sensor and computer automatic control technology is from foreign country, It can get precision Hologram register stamping, precision is ±0.20mm.

◆ 主要技术参数(machine technology parameter):
烫印面积
Stamping & Die-cut Area 320X250 mm 烫印速度
Stamp & Die-cut Speed 1000—5000
Pcs/h
放卷最大直径
Unwind Roll Dia.Max 500 mm 收卷最大直径
Rewind Roll Dia.Max 500 mm
进纸最大宽度
Max.Paper Width 340 mm 烫印箔规格
Specification Of Foil ≤Ø180 25/1″76/3″
走箔轴数
Foil Delivered Group 2+1
Groups 定位精度
Paper Register Precision ±0.20 mm
主电机功率
Main Drive Motor 3.0 KW 整机装机容量
Total Power 10.0 KW
整机重量
Machine Weigth 2200Kg 整机外形尺寸
Machine Size 290X80X175 cm