OEM manufacturer custom TU-030 thermostatic cartridge wax sensor for sanitary ware to Ecuador Factories

OEM manufacturer custom
 TU-030 thermostatic cartridge wax sensor for sanitary ware  to Ecuador Factories

Short Description:

Product Detail

Product Tags

As a way to finest meet up with client's wants, all of our operations are strictly performed in line with our motto "High Quality, Aggressive Price, Fast Service" for Car Accessory OEM , Industrial Paraffin Wax , Thermostatic Rad Valves , To learn more about what we can do for you, contact us at any time. We look forward to establishing good and long-term business relationships with you.
OEM manufacturer custom TU-030 thermostatic cartridge wax sensor for sanitary ware to Ecuador Factories Detail:

1. Operation Principle

The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.

2. Characteristic

(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.

(2)Temperature control is reliable and nicety

(3)No shaking and tranquilization in working condition.

(4)The element doesn’t need special maintenance.

(5)Working life is long.

3.Main Technical Parameters

(1)Handspike’s height may be confirmed by drawing and technical parameters

(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.

(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.

(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.

(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.


Product detail pictures:

OEM manufacturer custom
 TU-030 thermostatic cartridge wax sensor for sanitary ware  to Ecuador Factories detail pictures


No matter new customer or old customer, We believe in long term and trusted relationship for OEM manufacturer custom TU-030 thermostatic cartridge wax sensor for sanitary ware to Ecuador Factories, The product will supply to all over the world, such as: America , Bulgaria , South Africa , Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.



  • This video from http://www.DualFlushPro.com demonstrate how disassemble the Dual Flush Pro toilet conversion kit flush valve. This will help you if you ever need to replace the seal in the flush valve assembly.



    Video Notes:

    This shows how a heliostat can also be used to combine all the light rays into a tight focus or concentrated spot of energy (see Fig. 3 where the left (L) side of the mirror has been slightly adjusted). Unlike with a parabolic mirror, the targer/or receiver does not interfere with the collected/refelected light at the mirror, hence the larger the receiver/target the more feasable to use a heliostat rather than a parabolic dish.

    In the video I show the left side of the mirror “hard or fixed mounted” to the right side of the mirror in all the figures. Each mirror adds more weight that the motors need to be able to move. Today, there are very thin (1/16 inch thick) mirrors and even highly reflective and lightweight mylar films that can be used for mirrors…these may need some stability from the wind though.

    Note that the light rays from the Sun that strike the mirror are nearly parallel, and since the mirror is flat, the light rays that reflect will also be nearly parallel since they will be reflected at the same (angle).

    Technically for the (heliostat) mirror to reflect the light of the Sun onto a fixed target/collector/receiver that the face/surface of the mirror is “aimed” at both the horizontal (left to right) and vertical (up and down) angle bisection (half the angle) points between the Sun and the receiver. This is somewhat indicated with the purple line in the video.

    It is very feasable, like others have already done, to have “ganged” or mechanically linked mirrors that move as the “main or primary” heliostat mirror moves. But these “secondary” mirrors can have their very own receiver and be easilly set to others, or if needed, even the light can be combined to increase the energy focused onto the receiver.

    The closer the Suns rays and reflected rays are on the same line, the more energy collected. As the Sun sets, the less energy collected by the mirror since the length of the effective cross section of the mirror that receives the Sunlight is less. Of course you could adjust/move the target/receivers position so as to remedy this a bit, and if your concentrating the light from several fixed mirrors to a central focus, the receiver will have to be at the same distance (ie. radius) from the primary mirror so that all the light rays from each mirror will intersect at the receiver.

    There are several good sites related to heliostats. The field needs new developments and ideas from you. It’s not just about heliostats, but about CNC too. Do you know something about gears, heliostats, mirrors, solar things, or stepper motors, etc. Here is a good site and forum that you can join:

    http://cerebralmeltdown.com

    also

    http://redrok.com

    This video was made by me, however some of the concepts are probably already known to those in the field, so I cant take full credit of all the concepts presented, but are indebted to those who had previously thought about such matters. Some of the great concepts of heliostats first came from using mirrors to communicate (with light and shadow) with over long distances perhaps up to 10 miles or so. This would be the equivalent of a mobile walk-talkie or cellphone today.

    Heliostat = helio + stat = Sun + Stationary or Static , where the receiver is the static or stationary part of the system, or: to keep the Sun light in the same position.

    (c) trailkeeper on YouTube.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !