professional factory for TU-030 thermostatic cartridge wax sensor for sanitary ware to United States Importers
Short Description:
Product Detail
Product Tags
professional factory for TU-030 thermostatic cartridge wax sensor for sanitary ware to United States Importers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for professional factory for TU-030 thermostatic cartridge wax sensor for sanitary ware to United States Importers, The product will supply to all over the world, such as: Iraq , Chile , United Arab emirates , Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
Had a check engine light on my 2001 Ford Windstar, P1518 “Intake Manifold Runner Control Stuck Open.” After reading forums, most pointed to a plastic “bushing” clip coming off leaving a control arm hanging loose, leaving the intake manifold hanging open. Found a pack of replacement bushings (Dorman #47099) at O’Reilly Auto and managed to get a new one on with a couple pliers, then reinserted the control arm. Forums say that when this is replaced, the CEL should turn off on its own within a few days (about 60-120 miles of driving). I’ll update in comments after a few days of driving.
MY FOLLOWUP TO THIS VIDEO: A few days later, the check engine light DID go away on its own. It’s difficult to say with certainty, but my van also feels a bit more responsive, especially accelerating to highway speeds. So all in all, a good $6 experiment seems to have paid off!
https://www.intelligentactuator.com/
In a system for performing the alignment of some resin blocks, the ROBO Cylinder was adopted. The company’s products include designer plates to be used on the floor of a house by bonding resin blocks.
Previously, an air cylinder was used, this was changed to ROBO Cylinder which improved the cycle time and reduced the occurrence of Choco-Tei events.
When air cylinder was used:
Because the resin blocks were misaligned by the impact of the air cylinder stop, they were operating it at a reduced speed. However, Choco-Tei was still occurring about 10 times a day because of the misalignment due to unstable speed. To rearrange the resin block and to recover from Choco-Tei, it took about 1 minute.
After changing to ROBO Cylinder:
By replacing air cylinder to ROBO Cylinder, and adjusting the pressing force and acceleration/deceleration, they could increase the operating speed while minimizing the impact at the time of stop. In addition, Choco-Tei was reduced to near zero.
