12 Years Manufacturer TU-025 thermostatic cartridge wax sensor for sanitary ware to Serbia Manufacturers
Short Description:
Product Detail
Product Tags
12 Years Manufacturer TU-025 thermostatic cartridge wax sensor for sanitary ware to Serbia Manufacturers Detail:
1. Operation Principle
The Thermostatic Wax that has been sealed in shell body induces expansion by a given temperature, and inner rubber seal part drives its handspike to move under expansion pressure to realize a transition from thermal energy into mechanical energy. The Thermostatic Wax brings an upward movement to its handspike, and automatic control of various function are realized by use of upward movement of handspike. The return of handspike is accomplished by negative load in a given returned temperature.
2. Characteristic
(1)Small body size, occupied limited space, and its size and structure may be designed in according to the location where needs to work.
(2)Temperature control is reliable and nicety
(3)No shaking and tranquilization in working condition.
(4)The element doesn’t need special maintenance.
(5)Working life is long.
3.Main Technical Parameters
(1)Handspike’s height may be confirmed by drawing and technical parameters
(2)Handspike movement is relatives to the temperature range of the element, and the effective distance range is from 1.5mm to 20 mm.
(3)Temperature control range of thermal wax actuator is between –20 ~ 230℃.
(4)Lag phenomenon is generally 1 ~ 2℃. Friction of each component part and lag of the component part temperature cause a lag phenomenon. Because there is a difference between up and down curve of traveling distance.
(5)Loading force of thermal wax actuator is difference, it depends on its’ shell size.
Product detail pictures:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for 12 Years Manufacturer TU-025 thermostatic cartridge wax sensor for sanitary ware to Serbia Manufacturers, The product will supply to all over the world, such as: America, Hamburg, Zambia, We pay high attention to customer service, and cherish every customer. We have maintained a strong reputation in the industry for many years. We are honest and work on building a long-term relationship with our customers.
Bellows Seal Stop Valves(Straight-Through Type)
DIN Bellows Seal Stop Valve
DIN Bellows Globe Valve
DIN Faltenbalgventil Durchgangsform
DIN Válvulas de fuelle
DIN ventil uzavírací s vlnovcem přímý
DIN Standard seteventil med belg (Rett løp modell)
DIN Standardında Metal Körüklü Vana(Düz Tip)
Van cầu làm kín bằng bellows chuẩn DIN (kiểu thẳng)
ETM Code No. : ETM FIG.P.061,ETM FIG.P.062,ETM FIG.P.063
The ETM “PLUS” is reliably sealed, even under the most adverse conditions. The bellows-type valve is maintenance-free and like all ETM valves – is classed leak rate “A” in accordance with EN 12266-1.
Products:
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 16 Bar with Flanges According to DIN EN 1092-1
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 25 Bar with Flanges According to DIN EN 1092-1
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 40 Bar with Flanges According to DIN EN 1092-1
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 16 Bar with Butt Weld Ends According to DIN EN 12627
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 25 Bar with Butt Weld Ends According to DIN EN 12627
ETM-PLUS-BS/EN Standard bellows sealed stop valve PN 16 Bar with Butt Weld Ends According to DIN EN 12627
Material Equivalence:
EN Material Name———————–EN Number ————Forgings—————–ASTM Material——————-Forgings
EN 10213 GP240GH———————1.0619——————1.0460—————–ASTM A216 WCB—————–A105
EN 10213 G20Mo5———————–1.6220——————1.0437—————–ASTM A352 LCB——————A352 LF2
EN 10213 G17CrMo5-5——————1.7357——————1.7335—————–ASTM A217 WC6—————–A182 F11
EN 10213 G17CrMo9-10—————-1.7379——————1.7380 —————-ASTM A217 WC9—————–A182 F22
EN 10213 GX5CrNi19-10—————-1.4308——————1.4301—————–ASTM A351 CF8—————–A182 F304
EN 10213 GX5CrNi19-11-2————-1.4408 —————–1.4401—————–ASTM A351 CF8M—————-A182 F316
Features:
Cast steel PN10 ,PN16,PN25,PN40– DN15 to DN500
Straight-through
Easy operating handwheel with safe operation at all working temperatures
Energy-saving bell of chrome nickel steel with air cushion between bell and housing
Bellows of chrome-nickel steel
Internals (stem, disk and seat of stainless steel)
Disk flexibly attached to stem for easy replacement and to prevent vibration transfer to bellows
Flat Disc ,Parabolic & Regulation disc , PTFE Soft Seated Disc, Cone Disc, Stop Check Disc, Double Stage Disc & Balance Disc
Storage of oil device
Position indicator as standard
Heat dissipating bonnet design.
Locking Device / Stroke Limiter
Mediums:
Standard: Steam, gases, hot water, thermal fluids, hot oil, process water, vacuum facilities, ammonia etc.
Stainless Steel: Process water, aggressive media, etc.
Requirements and testing:
The test are carried out according to DIN EN12266-1
Shell test : nominal pressure (PN)X1.5
Tightness of seat :nominal pressure (PN)X1.1
Certificate of conformity in according to with PN-EN10204
Design according to PN-EN12516-2
Valves have been submitted for appraisal of conformity according to the directive pressure equipment directive 97/23/EC.
Installation:
They can be installed on pipelines in a vertical or horizontal and operation only
Direction of flow see body mark
Connection:
Butt-Welded according to DIN EN12627; Flanged according to EN1092-1 or to customer request
Face to face dimensions according to EN558-1 1 Series (DIN3202 F1 Series)
Operation:
Handwheel (If required)
Electric actuator
Gear box.
Flange ISO5210 (Ready for actuator)
Gate Valves (F4 Type),DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ),DIN F4 Gate valve,DIN absperrschieber F4,DIN Válvulas de compuerta,DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14,DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1, bygge lengde serie 14),DIN Standardında F4 Sürgülü Vana,Van cổng chuẩn DIN kiểu F4
Gate Valves (F7 Type),DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ),DIN F7 Gate valve,DIN Absperrschieber F7,DIN Válvulas de compuerta F7,DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26,DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1, bygge lengde serie 26),DIN Standardında F7 Sürgülü Vana,Van cổng chuẩn DIN kiểu F7
Swing Check Valve,DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1),DIN F6 Swing check valve,DIN F1 Swing check valve,DIN Rückschlagklappe,DIN Válvula de retención clapeta oscilante,DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1,DIN Standard Sving-klaff tilbakeslagsventil (Lengde iht. to DIN EN 558-1, bygge lengde serie 48 & serie 1),DIN Standardında Çalpara Çek Valf,Van 1 chiều lá lật chuẩn DIN
Description:
HY630 is liquid rubber(condensation cure rtv, or tin cure silicone) mainly used for silicone plastic molds, with the advantages of good tensile strength, high tear strength, high temperature resistance, excellent chemical resistance, high duplication times, long-term stability, high durability, etc. This moulding rubber is one of the products with the highest use level in the production of craftwork gifts and its shrinkage is even lower than 2‰. RTV mould rubber and silicone rubber are general called two-component room temperature vulcanization silicone with excellent fluidity and good operational flexibility, easy moulding process, and so on. Add curing agent of 2%-3% at the room temperature, the rtv mould rubber is still operational within 30 minutes,and after 2-5 hours, the silicone elastomer(silicone mold) will be obtained with resistance to deformation, extremely high or low temperature, acid and alkali and expansion. The rtv mould rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles. It is also suitable for fabrication of precision molds.
RTV Mould Rubber Applications:
Plastic molds, silicone soft plastic molds,making molds for plastic toys, plastic crafts, plastic gifts, PU products,stationary products, pavement, and so on. It has a quite broad applications due to its favorable viscosity and hardness.
RTV Mould Rubber Standard Datasheet:
Model
Appearance
Viscosity (cs)
Hardness (A°)
Tensile Strength (kgf/c㎡)
Tear Strength (kgf/㎝)
Elongation (%)
Mixing ratio(%)
Operating Time(H)
Curing Time(H)
630
White
30000~38000
30±2
≥3.8
≥2.8
≥380
2~3
0.5~1
2~5
Operation Instruction for rtv mould rubber:
The product is a kind of white flowing liquid . If the customer wants to make large products and large size molds, the mold should be made of rtv mould rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of rtv mould rubber with low hardness. The amount of the curing agent depends on the actual requirements of the customer.
The proportions and reactions of the curing agent and the silicone are listed in the following:
1. Curing agent 1% added, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.
2. Curing agent 2% added, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.
3. Curing agent 3% added, the silicone can still be operated within 28 – 30 minutes and can be demoulded after 1.5-2 hours.
4. Curing agent 4% added, the silicone can still be operated within 10 – 15 minutes and can be demoulded after 1 -1.5 hours.
The manufacturer of liquid silicone rubber for more than 10 years.
Any more information abt Liquid Silicone rubber, pls feel free to contact Ms. Jojo
Mobile: 0086-18938867508
Email:hyxz@szrl.net
Skype: live:siliconerubber
WhatsApp:008618938867508
