Brad Vorrie Presents Exlar Tritex II Part One: a product overview
The Tritex II is an “all in one” linear actuator that combines a mechanical actuator, along with the drive and servo for a complete stand-alone solution. Unlike most linear actuators Exlar’s Tritex actuator is based off of a patented, inverted roller screw.
This video is designed to introduce you to the mechanical and electrical features of the Tritex II actuators.
Be sure to check out:
Part 2 is will show you the initial setup of the actuator and the process of getting online.
Part 3 will show you how to set up a home sequence, how to jog, and how to create a move.
Part 4 will show you how to use the analog signal.
Part 5 will show you how to download the program and the online monitoring functions.
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
Post time: Jun-12-2017