https://www.etrailer.com/.html
Today on our boat trailer, we'll be installing the Titan zinc-plated leverlock brake actuator, part number t47154007k. To begin our install we'll first need to remove the old or manufacturer's actuator and tongue. To do this, we'll first remove the brake line from the back of the master cylinder. Once we remove the brake line we can then remove the two fasteners that secure it to the frame of our trailer. Take the nut and split lock washer off, both fasteners and then remove the bolts. With the bolts removed we can go ahead and take the actuator off and set it aside. We'll take the new Titan actuator, set it on to the frame and re-install the bolts. Once we have them installed and finger-tight, we'll go ahead and tighten them down. We have the new tongue and actuator installed.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Post time: Jun-12-2017